A Question about my computer

By imxelite
Jun 22, 2007
  1. I had a motherboard die on me that I replaced. I purchased an open box motherboard from Everything seemed fine then one morning the computer starts up but no video I asked for opinions and the most people said the video died. Okay I purchase a new one-computer shows video now. Then two days later when I boot my computer it does the same thing and boots into windows but no video. Weird thing is I left the computer on while I went downstairs for about ten minutes I come back and restart then the picture shows up. I’ve tested this a few times and it’s consistent when I use the computer for a while shut down the video won’t come on unless I leave the computer on for a while then restart. I have no idea what’s wrong now since I hooked my monitor up to my laptop and it comes on fine.
  2. CCT

    CCT TS Evangelist Posts: 2,653   +6

    Download and run Everest Free and look under Computer, Sensor for the voltages and post them.
  3. imxelite

    imxelite TS Rookie Topic Starter Posts: 28

    CPU Type DualCore AMD Athlon 64 X2, 2200 MHz (11 x 200) 4400+
    Motherboard Name MSI K8N Neo4 Series (MS-7125) (4 PCI, 1 PCI-E x1, 1 PCI-E x4, 1 PCI-E x16, 4 DDR DIMM, Audio, Gigabit LAN)
    Motherboard Chipset nVIDIA nForce4, AMD Hammer
    System Memory 1024 MB (PC3200 DDR SDRAM)
    BIOS Type Award (05/22/06)
    Communication Port Communications Port (COM1)
    Communication Port Printer Port (LPT1)

    Video Adapter GeForce 7600 GT
    Video Adapter GeForce 7600 GT
    Monitor Generic PnP Monitor [NoDB] (854)

    --------[ Sensor ]------------------------------------------------------------------------------------------------------

    Sensor Properties:
    Sensor Type Winbond W83627THF (ISA 290h)
    Motherboard Name MSI MS-7046 / 7100 / 7125

    Motherboard 41 °C (106 °F)
    CPU 40 °C (104 °F)
    Aux 19 °C (66 °F)
    Seagate ST3300831A 40 °C (104 °F)

    Cooling Fans:
    System 2848 RPM

    Voltage Values:
    CPU Core 1.35 V
    +3.3 V 3.33 V
    +5 V 5.08 V
    +12 V 12.04 V
    +5 V Standby 5.11 V
    VBAT Battery 2.99 V
    Debug Info F ED FF FF
    Debug Info T 41 40 19
    Debug Info V 88 D0 C6 BD 21 04 00 (01)
  4. imxelite

    imxelite TS Rookie Topic Starter Posts: 28

  5. CCT

    CCT TS Evangelist Posts: 2,653   +6

    Well, the voltages look fine and you aren't getting any error messages just the need to basically boot twice to get video working. After that second boot, does it still shutdown or is it ok until next time you go to start the comp?

    I really don't have any answers for you. Basically, reseating the card and checking the cable and ensuring any additional power supply is connected well are all I can think of.

Topic Status:
Not open for further replies.

Similar Topics

Add New Comment

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...