all i see is black and white while i play my game

[BOBWA]

right i ve just brought tom clancys rainbow six lockdown i have most of the requirements it needs even though my raphics cards a radeon 9200
the problem is that the game runs fine but that when i play it all i see around me is black and any objects that are white like lamps and i can see the cross hairs thats all can someone please tell me why

my friend thinks my graphics card is to rubbish to run it

the game specs are
windows 2000 or xp
processor 1.5ghz pentium iv
ram 512
video card 64mbagp or pci direct x 9.0 supporting pixel and vertex shaders
etc lol

my specs


Video Adapter FIC Radeon 9200 SE
GPU Code Name RV280
PCI Device 1002 / 5964
Transistors 36 million
Process Technology 0.15 um
Bus Type AGP 4x @ 4x
Memory Size 128 MB
GPU Clock 200 MHz (original: 200 MHz)
RAMDAC Clock 400 MHz
Pixel Pipelines 4
TMU Per Pipeline 1
Vertex Shaders 1 (v1.1)
Pixel Shaders 1 (v1.4)
DirectX Hardware Support DirectX v8.1
Pixel Fillrate 800 MPixel/s
Texel Fillrate 800 MTexel/s

Memory Bus Properties
Bus Type DDR
Bus Width 64-bit
Real Clock 200 MHz (DDR) (original: 200 MHz)
Effective Clock 400 MHz
Bandwidth 3200 MB/s


help me please

 

[BOBWA]

pleaseeeeee

can anyone tell me wats happened please otherwise i m guna have to take game back and i dont want to looks like a phat game please help me lol

 

[N3051M]

try game with minimal settings..
make sure you have the latest drivers and direct x 9 etc..
check your psu giving enough juice to the system: use a psu calculator to determine this.
what is your full pc specs please? mobo, ram, cpu etc

 

[BOBWA]

i have put all settings to minimum and it still does the same think even worse i cant see the lights no more lol
my cpu is pentium 4
2.8 ghz
ram 512
120 gb memory

i dunno why its doing this really
heres all my motherboard specs

Front Side Bus Properties
Bus Type Intel NetBurst
Bus Width 64-bit
Real Clock 100 MHz (QDR)
Effective Clock 400 MHz
Bandwidth 3200 MB/s

Memory Bus Properties
Bus Type DDR SDRAM
Bus Width 64-bit
DRAM:FSB Ratio 4:3
Real Clock 133 MHz (DDR)
Effective Clock 267 MHz
Bandwidth 2133 MB/s

Chipset Bus Properties
Bus Type Intel Hub Interface
Bus Width 8-bit
Real Clock 67 MHz (QDR)
Effective Clock 267 MHz
Bandwidth 267 MB/s

Motherboard Physical Info
CPU Sockets/Slots 1
Expansion Slots 3 PCI
RAM Slots 2 DIMM
Integrated Devices Audio, Video
Form Factor Micro ATX
Motherboard Chipset i845G/GE/GL/GV

and heres my cpu specs

Field Value
CPU Properties
CPU Type Intel Pentium 4, 2800 MHz (28 x 100)
CPU Alias Northwood, A80532
CPU Stepping D1
Instruction Set x86, MMX, SSE, SSE2
Original Clock 2800 MHz
Min / Max CPU Multiplier 28x / 28x
Engineering Sample No
L1 Trace Cache 12K Instructions
L1 Data Cache 8 KB
L2 Cache 512 KB (On-Die, ECC, ATC, Full-Speed)

CPU Physical Info
Package Type 478 Pin uPGA
Package Size 3.50 cm x 3.50 cm
Transistors 55 million
Process Technology 6M, 0.13 um, CMOS, Cu, Low-K
Die Size 131 mm2
Core Voltage 1.475 - 1.55 V
I/O Voltage 1.475 - 1.55 V
Typical Power 38.7 - 89.0 W (depending on clock speed)
Maximum Power 49 - 109 W (depending on clock speed)

 

[N3051M]

try updating directx to 9.0c
http://www.microsoft.com/downloads/...20-BFBB-4799-9908-D418CDEAC197&displaylang=en

and also updating to the latest drivers for your video card here
http://www.ati.com/products/radeon9200/radeon9200/index.html

take a look on the side of your power supply unit (the box where you plug your electricity cable into the pc), what wattage does it read there? and what brand is it?
when booting up, hit DEL or whatever key it is to go into SETUP (BIOS), use the arrow keys and find the Hardware Monitor/Sensor (place where it tells you the tempratures and voltages etc) post that here.

can i also know how many drives (optical, hdds, floppys etc) you are running and any other devices attached like PCI cards etc.. you can just give summary of them or the make/model..

by the way, if you have some cash lying about i suggest going add another 512mb of RAM to give more system headroom...

 

[Cypher2006]

hey, i think the problem is fixed now guys i showed rob the Newest direct X and ATI drivers and he said the game works and so do others that didnt