I have a an ASUS A7N8X Deluxe
I am trying to buy a 1 gig ram card for it and am not sure if the motherboard supports 128x64 configuration.
this is my motherboard specs
- 3 x 184-pin DIMM Sockets support max. 3GB PC3200/PC2700/PC2100/PC1600 non-ECC DDR SDRAM memory
- Dual Channel Memory Architecture
these are the specs for the ram im looking at.
GENERAL SPECIFICATIONS
184 PIN Memory
3.2 GB/sec
400Mhz
2.5 Volt Module
DIMM (DUAL IN-LINE MEMORY 128 X 64) HIGH DENSITY
Non-ECC, Non-Parity
Unbuffered
1GB DDR 400MHz, PC3200, 2.5V, Non-Parity, Non-ECC, 184-pin Cas Latency 3.0
DDR memory, or Double Data Rate memory, is an evolutionary new memory technology that doubles data throughput to the processor. As an evolution of today’s PC133 SDRAM, DDR leverages the existing production and environment to provide unrivaled PC performance at an affordable price.
Specifications:1GB 400MHZ 184PIN DDR Memory, No-ECC. Higher performance over mainstream PC100 or PC133 memory. Up to 3.2 GB/sec of peak bandwidth using PC3200 DIMMs (with DDR400 memory chips). JEDEC Standard. 184 pin DIMM, non-ECC. DIMM Lead pitch: 1.27 mm. 2.5 Volts. SSTL-2 I/O Interface. SPD Support. Support for Memory Chip Stacking.
I am trying to buy a 1 gig ram card for it and am not sure if the motherboard supports 128x64 configuration.
this is my motherboard specs
- 3 x 184-pin DIMM Sockets support max. 3GB PC3200/PC2700/PC2100/PC1600 non-ECC DDR SDRAM memory
- Dual Channel Memory Architecture
these are the specs for the ram im looking at.
GENERAL SPECIFICATIONS
184 PIN Memory
3.2 GB/sec
400Mhz
2.5 Volt Module
DIMM (DUAL IN-LINE MEMORY 128 X 64) HIGH DENSITY
Non-ECC, Non-Parity
Unbuffered
1GB DDR 400MHz, PC3200, 2.5V, Non-Parity, Non-ECC, 184-pin Cas Latency 3.0
DDR memory, or Double Data Rate memory, is an evolutionary new memory technology that doubles data throughput to the processor. As an evolution of today’s PC133 SDRAM, DDR leverages the existing production and environment to provide unrivaled PC performance at an affordable price.
Specifications:1GB 400MHZ 184PIN DDR Memory, No-ECC. Higher performance over mainstream PC100 or PC133 memory. Up to 3.2 GB/sec of peak bandwidth using PC3200 DIMMs (with DDR400 memory chips). JEDEC Standard. 184 pin DIMM, non-ECC. DIMM Lead pitch: 1.27 mm. 2.5 Volts. SSTL-2 I/O Interface. SPD Support. Support for Memory Chip Stacking.
