Hello, I'm having difficulty reading the minidump I ran through the windows debug tools. I've been getting lock ups and blue screen crashes as well as random restarts. I've tested the memory with +86 Memtest and even used WinMem test to run windows instructions on the memory, all come back good. PSU is a 600w supply so its not under powered. Here is the converted dump.
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: d0860020, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: 80513ad4, address which referenced memory
Debugging Details:
------------------
WRITE_ADDRESS: d0860020
CURRENT_IRQL: 2
FAULTING_IP:
nt!MiAddViewsForSection+2c
80513ad4 897a04 mov dword ptr [edx+4],edi
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: System
LAST_CONTROL_TRANSFER: from 80518784 to 80513ad4
STACK_TEXT:
f7a53b74 80518784 86001c79 0001a3c0 3ed07800 nt!MiAddViewsForSection+0x2c
f7a53bb0 804e75e1 e1127608 86db7d10 0001a380 nt!MmMapViewInSystemCache+0x12e
f7a53c3c 804e7864 8604e578 2b390000 00000000 nt!CcGetVacbMiss+0x283
f7a53c74 804e0f7a 0004e578 2b390000 00000000 nt!CcGetVirtualAddress+0x94
f7a53d2c 804e61eb 86dc4288 8055a440 86dc58b8 nt!CcPerformReadAhead+0x194
f7a53d74 80534006 86dc4288 00000000 86dc58b8 nt!CcWorkerThread+0x147
f7a53dac 805c4d5c 86dc4288 00000000 00000000 nt!ExpWorkerThread+0x100
f7a53ddc 805411e2 80533f06 00000000 00000000 nt!PspSystemThreadStartup+0x34
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!MiAddViewsForSection+2c
80513ad4 897a04 mov dword ptr [edx+4],edi
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: nt!MiAddViewsForSection+2c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4a7833f0
IMAGE_NAME: memory_corruption
FAILURE_BUCKET_ID: 0xA_nt!MiAddViewsForSection+2c
BUCKET_ID: 0xA_nt!MiAddViewsForSection+2c
Followup: MachineOwner
---------
eax=f7a53b00 ebx=86001c79 ecx=00000000 edx=d086001c esi=86001c79 edi=0086001c
eip=80513ad4 esp=f7a53b68 ebp=f7a53b74 iopl=0 nv up ei ng nz na po nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010282
nt!MiAddViewsForSection+0x2c:
80513ad4 897a04 mov dword ptr [edx+4],edi ds:0023:d0860020=????????
ChildEBP RetAddr Args to Child
f7a53b74 80518784 86001c79 0001a3c0 3ed07800 nt!MiAddViewsForSection+0x2c (FPO: [4,0,4])
f7a53bb0 804e75e1 e1127608 86db7d10 0001a380 nt!MmMapViewInSystemCache+0x12e (FPO: [4,6,0])
f7a53c3c 804e7864 8604e578 2b390000 00000000 nt!CcGetVacbMiss+0x283 (FPO: [Non-Fpo])
f7a53c74 804e0f7a 0004e578 2b390000 00000000 nt!CcGetVirtualAddress+0x94 (FPO: [5,5,4])
f7a53d2c 804e61eb 86dc4288 8055a440 86dc58b8 nt!CcPerformReadAhead+0x194 (FPO: [Non-Fpo])
f7a53d74 80534006 86dc4288 00000000 86dc58b8 nt!CcWorkerThread+0x147 (FPO: [Non-Fpo])
f7a53dac 805c4d5c 86dc4288 00000000 00000000 nt!ExpWorkerThread+0x100 (FPO: [1,8,0])
f7a53ddc 805411e2 80533f06 00000000 00000000 nt!PspSystemThreadStartup+0x34 (FPO: [Non-Fpo])
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16
Unloaded modules:
f7c94000 f7c95000 drmkaud.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ac2ae000 ac2d1000 aec.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ac4c6000 ac4d3000 DMusic.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ac4d6000 ac4e4000 swmidi.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
f7bb6000 f7bb8000 splitter.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
f77ec000 f77f5000 processr.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
f7aac000 f7ab0000 kbdhid.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
f778c000 f7799000 i8042prt.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
f7934000 f7939000 Cdaudio.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
f7300000 f7303000 Sfloppy.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
^ Syntax error in '.reload;!analyze -v;r;kv;lmnt;logclose;q'
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: d0860020, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: 80513ad4, address which referenced memory
Debugging Details:
------------------
WRITE_ADDRESS: d0860020
CURRENT_IRQL: 2
FAULTING_IP:
nt!MiAddViewsForSection+2c
80513ad4 897a04 mov dword ptr [edx+4],edi
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: System
LAST_CONTROL_TRANSFER: from 80518784 to 80513ad4
STACK_TEXT:
f7a53b74 80518784 86001c79 0001a3c0 3ed07800 nt!MiAddViewsForSection+0x2c
f7a53bb0 804e75e1 e1127608 86db7d10 0001a380 nt!MmMapViewInSystemCache+0x12e
f7a53c3c 804e7864 8604e578 2b390000 00000000 nt!CcGetVacbMiss+0x283
f7a53c74 804e0f7a 0004e578 2b390000 00000000 nt!CcGetVirtualAddress+0x94
f7a53d2c 804e61eb 86dc4288 8055a440 86dc58b8 nt!CcPerformReadAhead+0x194
f7a53d74 80534006 86dc4288 00000000 86dc58b8 nt!CcWorkerThread+0x147
f7a53dac 805c4d5c 86dc4288 00000000 00000000 nt!ExpWorkerThread+0x100
f7a53ddc 805411e2 80533f06 00000000 00000000 nt!PspSystemThreadStartup+0x34
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!MiAddViewsForSection+2c
80513ad4 897a04 mov dword ptr [edx+4],edi
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: nt!MiAddViewsForSection+2c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4a7833f0
IMAGE_NAME: memory_corruption
FAILURE_BUCKET_ID: 0xA_nt!MiAddViewsForSection+2c
BUCKET_ID: 0xA_nt!MiAddViewsForSection+2c
Followup: MachineOwner
---------
eax=f7a53b00 ebx=86001c79 ecx=00000000 edx=d086001c esi=86001c79 edi=0086001c
eip=80513ad4 esp=f7a53b68 ebp=f7a53b74 iopl=0 nv up ei ng nz na po nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010282
nt!MiAddViewsForSection+0x2c:
80513ad4 897a04 mov dword ptr [edx+4],edi ds:0023:d0860020=????????
ChildEBP RetAddr Args to Child
f7a53b74 80518784 86001c79 0001a3c0 3ed07800 nt!MiAddViewsForSection+0x2c (FPO: [4,0,4])
f7a53bb0 804e75e1 e1127608 86db7d10 0001a380 nt!MmMapViewInSystemCache+0x12e (FPO: [4,6,0])
f7a53c3c 804e7864 8604e578 2b390000 00000000 nt!CcGetVacbMiss+0x283 (FPO: [Non-Fpo])
f7a53c74 804e0f7a 0004e578 2b390000 00000000 nt!CcGetVirtualAddress+0x94 (FPO: [5,5,4])
f7a53d2c 804e61eb 86dc4288 8055a440 86dc58b8 nt!CcPerformReadAhead+0x194 (FPO: [Non-Fpo])
f7a53d74 80534006 86dc4288 00000000 86dc58b8 nt!CcWorkerThread+0x147 (FPO: [Non-Fpo])
f7a53dac 805c4d5c 86dc4288 00000000 00000000 nt!ExpWorkerThread+0x100 (FPO: [1,8,0])
f7a53ddc 805411e2 80533f06 00000000 00000000 nt!PspSystemThreadStartup+0x34 (FPO: [Non-Fpo])
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16
Unloaded modules:
f7c94000 f7c95000 drmkaud.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ac2ae000 ac2d1000 aec.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ac4c6000 ac4d3000 DMusic.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ac4d6000 ac4e4000 swmidi.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
f7bb6000 f7bb8000 splitter.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
f77ec000 f77f5000 processr.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
f7aac000 f7ab0000 kbdhid.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
f778c000 f7799000 i8042prt.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
f7934000 f7939000 Cdaudio.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
f7300000 f7303000 Sfloppy.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
^ Syntax error in '.reload;!analyze -v;r;kv;lmnt;logclose;q'