TechSpot

Crashes with and without BSOD

By Toppers
Oct 21, 2007
  1. Hi I have been getting some crashes in my new rig (self made) specs below:

    Case; Antec Nine Hundred Ultimate Gaming Case
    PSU: Hiper 580 watt
    Mobo: Asus P5N-E SLI 650i Socket 775 PCI-E Onboard Audio ATX Motherboard
    Processor: Intel Core 2 Quad Q6600 (2.4GHz 1066MHz) Socket 775 L2 8MB Cache (2x4MB (4MB per core pair)) Retail Boxed Processor
    Card name: Radeon X1950 Pro Shappire 512meg
    Memory: OCZ 2GB Kit (2x1GB) DDR2 800MHz/PC2-6400 CL 4-4-4-15 PLATINUM XTC with LIFETIME WARRANTY
    HDD: 2 x Samsung SpinPoint T HD160HJ 160GB SATA-II 8MB Cache - OEM
    DVD/CD: LiteON DH-20A3P-12C 20x DVD±RW x12 Ram Dual Layer DVD-Writer (Black) - OEM
    DVD/CD: NEC AD7170A 18x18 DVD±RW Dual Layer ReWriter (Black) - OEM
    OS: WinXP sp2
    AV: Macafee
    Firewall:Macafee
    Route:Linksys AG241 ADSL2+ Modem/Router

    It happens when I am playing 2 games MOH:Airborne and Enemy Territiry Quake Wars, although my wife had firefox shut down on her for no reason the other day and reboot the system!

    All drivers upto date as far as I know.
    Chipset updated
    BIOS not updated as I do not know what I am doing there!
    Games reinstalled twice and latest patches applied
    new fan added to case (see case specs)
    Nothing overcloked all set as standard

    Did have to run chkdsk one day as system would not boot past loading screen, it found errors and fixed them and then system rebooted ok This was very early on , not long after the build was done, say about 3 days or so.

    If you need more info I will supply it, sorry it is not as good as the example first post that was awsome!!


    I have attached some mindump files in and a DxDiag if that helps?

    I have put 5 in there zip but I had 2 such events on some days so only included 1 from each day.
     
  2. AlbertLionheart

    AlbertLionheart TechSpot Chancellor Posts: 2,026

    Try downloading Everest from www.majorgeeks.com and run that to check your temperatures.
     
  3. peterdiva

    peterdiva TechSpot Ambassador Posts: 1,088

  4. Toppers

    Toppers TS Rookie Topic Starter

    Yup its the same !!!!

    So how do I increase the voltage if needed?
     
  5. Toppers

    Toppers TS Rookie Topic Starter

    hereis the RAM results from the test... is the voltge low?

    DIMM #1

    General
    Memory type DDR2
    Module format Regular UDIMM
    Manufacturer (ID) OCZ (7F7F7F7FB0000000)
    Size 1024 MBytes
    Max bandwidth PC2-6400 (400 MHz)
    Part number OCZ2P800R21G
    Serial number 4F435A32
    Manufacturing date Week 26/Year 06

    Attributes
    Number of banks 2
    Data width 64 bits
    Correction None
    Nominal Voltage 1.80 Volts
    EPP no
    XMP no

    Timings table
    Frequency (MHz) 270 333 400
    CAS# 3.0 4.0 5.0
    RAS# to CAS# delay 4 5 5
    RAS# Precharge 4 5 5
    TRAS 10 13 15
    TRC 15 19 22

    DIMM #2

    General
    Memory type DDR2
    Module format Regular UDIMM
    Manufacturer (ID) OCZ (7F7F7F7FB0000000)
    Size 1024 MBytes
    Max bandwidth PC2-6400 (400 MHz)
    Part number OCZ2P800R21G
    Serial number 4F435A32
    Manufacturing date Week 26/Year 06

    Attributes
    Number of banks 2
    Data width 64 bits
    Correction None
    Nominal Voltage 1.80 Volts
    EPP no
    XMP no

    Timings table
    Frequency (MHz) 270 333 400
    CAS# 3.0 4.0 5.0
    RAS# to CAS# delay 4 5 5
    RAS# Precharge 4 5 5
    TRAS 10 13 15
    TRC 15 19 22
     
  6. Toppers

    Toppers TS Rookie Topic Starter

    Just out of interest which memory slots should i use my sticks in?

    Currently in A1 and B1 is this right?

    Motherboard is a ASUS P5N-E SLI
     
  7. Toppers

    Toppers TS Rookie Topic Starter

    right ran a mem test and got errors aftr 2.2% or the like upped the voltage to 1.92 next setting from auto and it ran till 26% I stopped then as I have some work to do, but no errors, wil do a full test leter and report back.....
     
Topic Status:
Not open for further replies.

Similar Topics

Add New Comment

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...