Hi,
Im having a problem trying to run Rollercoaster Tycoon 3, when i click the icon it says "unable to create direct 3d device".
Heres my spec from dxdiag:
------------------
System Information
------------------
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 1 (2600.xpsp1.020828-1920)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: Presario 2100 (DM964A)
BIOS: PhoenixBIOS 4.0 Release 6.0
Processor: mobile AMD Athlon(tm) XP2500+, ~530MHz
Memory: 190MB RAM
Page File: 182MB used, 283MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.0001.0904 32bit Unicode
---------------
Display Devices
---------------
Card name: ATI Radeon IGP 320M
Manufacturer: ATI Technologies Inc.
Chip type: ATI U1 (C6)
DAC type: Internal DAC(350MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4336&SUBSYS_0024103C&REV_00
Display Memory: 64.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Default Monitor
Monitor Max Res:
Driver Name: ati2dvag.dll
Driver Version: 6.13.0010.6094 (English)
DDI Version: 8
Driver Attributes: Final Retail
Driver Date/Size: 6/12/2002 00:41:48, 203008 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 6/12/2002 00:41:32, 448512 bytes
Device Identifier: {D7B71EE2-0076-11CF-4264-2E20A2C2CB35}
Vendor ID: 0x1002
Device ID: 0x4336
SubSys ID: 0x0024103C
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_D ModeMPEG2_C
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
------------------------------------------------
i am aware that the minimum porcessor for rct3 is 733mhz and mine is 530mhz, however i have previously run the game on my machine.
Im having a problem trying to run Rollercoaster Tycoon 3, when i click the icon it says "unable to create direct 3d device".
Heres my spec from dxdiag:
------------------
System Information
------------------
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 1 (2600.xpsp1.020828-1920)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: Presario 2100 (DM964A)
BIOS: PhoenixBIOS 4.0 Release 6.0
Processor: mobile AMD Athlon(tm) XP2500+, ~530MHz
Memory: 190MB RAM
Page File: 182MB used, 283MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.0001.0904 32bit Unicode
---------------
Display Devices
---------------
Card name: ATI Radeon IGP 320M
Manufacturer: ATI Technologies Inc.
Chip type: ATI U1 (C6)
DAC type: Internal DAC(350MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4336&SUBSYS_0024103C&REV_00
Display Memory: 64.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Default Monitor
Monitor Max Res:
Driver Name: ati2dvag.dll
Driver Version: 6.13.0010.6094 (English)
DDI Version: 8
Driver Attributes: Final Retail
Driver Date/Size: 6/12/2002 00:41:48, 203008 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 6/12/2002 00:41:32, 448512 bytes
Device Identifier: {D7B71EE2-0076-11CF-4264-2E20A2C2CB35}
Vendor ID: 0x1002
Device ID: 0x4336
SubSys ID: 0x0024103C
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_D ModeMPEG2_C
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
------------------------------------------------
i am aware that the minimum porcessor for rct3 is 733mhz and mine is 530mhz, however i have previously run the game on my machine.
