TechSpot

DISPLAY problem.

By orphee02
Mar 5, 2007
  1. Help I am not a teckie and know little about the internal workings of a computer, but my desktop has been having an on going DISPLAY problem. Basically it crashes.

    Recently for the umpteenth time it has crashed and I have gone through to the VgaSave Properties and there it says


    Conflict device list

    Imput/Output Range 03BO - 03BB used by:
    VIA CPU to AGP2.0/AGP3.0 Controller
    Imput/Output Range 03C0 - 03DF used by:
    VIA CPU to AGP2.0/AGP3.0 Controller
    Memory Range 000A0000 - 000BFFFF used by
    VIA CPU to AGP2.0/AGP3.0 Controller


    is this what is causing the crashing and if so what do I do to change it?

    Edit: Thread moved. Please use proper thread titles from now on and post in the correct forum. Thanks.
     
  2. tipstir

    tipstir TS Ambassador Posts: 4,693   +86

    Set the BIOS to the default mode or clear the CMOS Chipset. If you don't know where that is you can pull out the watch battery type looks like silver coin. Unplug the PC. Wait 3 secs, I say 10 secs then put it back in and unplug the PC. Try it now...
     
  3. orphee02

    orphee02 TS Rookie Topic Starter

    thank you but

    Thank you but............

    I did say

    I am not a teckie and know little about the internal workings of a computer, though I am sure that information is helpful, maybe I will make a note and mention it to a comp repair man.
     
Topic Status:
Not open for further replies.


Add New Comment

TechSpot Members
Login or sign up for free,
it takes about 30 seconds.
You may also...


Get complete access to the TechSpot community. Join thousands of technology enthusiasts that contribute and share knowledge in our forum. Get a private inbox, upload your own photo gallery and more.