Error when burning using Nero 6.0

[polsantos]

[FONT=Verdana]Hi, is anybody else experiencing this issue when trying to burn videos (as data cds) using Nero?

This is the error log i got on my last try...so far i've wasted 10 disks



Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero version: 6.6.0.3 (Nero Express)
Recorder: <SONY CD-RW CRX225E> Version: QYB1 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: < ATAPI CDROM. >Version: 16BJ - HA 1 TA 1 - 6.6.0.3
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST310212A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST340016A atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : SONY CD-RW CRX225E atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : ATAPI CDROM. atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
SONY CD-RW CRX225E G: CDRom0
ATAPI CDROM. H: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 49283072 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 315MB (323100kB)
Free physical memory: 59MB (61228kB)
Memory in use : 81 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.12.2004
CD-ROM (ISO)
4:21:43 PM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:21:43 PM #2 Text 0 File Burncd.cpp, Line 2866
SONY CD-RW CRX225E
Buffer under-run error protection activated

4:21:43 PM #3 Text 0 File Reader.cpp, Line 127
Reader running

4:21:43 PM #4 Text 0 File Writer.cpp, Line 122
Writer SONY CD-RW CRX225E running

4:21:43 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

4:21:44 PM #6 Text 0 File Burncd.cpp, Line 3151
Turn on Track-at-once, using CD-R/RW media

4:21:45 PM #7 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 266607 ( 59:16.57)

4:21:45 PM #8 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

4:21:45 PM #9 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: SONY CD-RW CRX225E;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

4:21:45 PM #10 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:21:45 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 266608 (266608) = #266608/59:14.58
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 266606 blocks [SONY CD-RW CRX225E]
--------------------------------------------------------------

4:21:46 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [SONY CD-RW CRX225E] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 546320384, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
266608 | lead-out | 1 | 0x41 | 0x00

4:21:46 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1105
Removed 2 run-out blocks from end of track 1. Length: 266608 -> 266606.

4:21:47 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

4:21:53 PM #15 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.

4:21:53 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

4:21:53 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 40x (6,000 KB/s)

4:21:53 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:21:54 PM #19 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer under-run error protection -> ON , SMART-BURN : ON

4:24:02 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05BF0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0xFA 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

4:24:02 PM #21 CDR -1135 File Writer.cpp, Line 311
Write error

4:24:02 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:24:03 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

4:24:03 PM #24 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
SONY CD-RW CRX225E\H1 T0

4:24:03 PM #25 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

4:24:03 PM #26 Text 0 File Mmc.cpp, Line 15737
<SONY CD-RW CRX225E > start Close Session

4:24:22 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 40x (6,000 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 2:46:22 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 8:00:00 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)[/FONT]

 

[mgsuarezval]

Same problem - Write error on Windows XP with Nero

I have the same problem and I've already wasted 15 CDs.
If it helps, I can tell you what I've tried out...
1) Disable de service: "IMAPI CD-Burning COM Service" because it has compatibility problems with CD burning software
2) Install ForceASPI
3) Reinstall Windows XP without using service pack 2

I've tried those suposed solutions but had no luck. Maybe it works for you.

If you find a solutions please post it.
Thank you.

 

[Liquidlen]

In Nero program you should have an Add-on called
"Info Tool" Run that and check your ASPI layer for 'System' and 'Nero' you should get a green bar for both.
Also try a test with DMA turned Off or if that fails try with it On ,
Next confirm that you have the latest 'Firmware for your Writer.
Make sure the Drive that has your' Cache file ' has lots of room.Youcan set a new one in Nero Preferences.
Did you use media that is recommended for your writer?
I find it is best to test different brands using Re-writable media first.
Let us know how it works out.

 

[mgsuarezval]

In Nero program you should have an Add-on called
"Info Tool" Run that and check your ASPI layer for 'System' and 'Nero' you should get a green bar for both.
Also try a test with DMA turned Off or if that fails try with it On ,
Next confirm that you have the latest 'Firmware for your Writer.
Make sure the Drive that has your' Cache file ' has lots of room.Youcan set a new one in Nero Preferences.
Did you use media that is recommended for your writer?
I find it is best to test different brands using Re-writable media first.
Let us know how it works out.

1) I checked the ASPI with the Nero tool, and the system ASPI was yellow. I installed the Adaptec ASPI 4.72 and it remained yellow, so I tried with ForceASPI 4.71 and it became green. I tried to burn again but the error persisted.
2) Tried with PIO and DMA but nothing
3) The firmware of the writer is the latest available.
4) I'm using C: as temporary drive and has 7 GB available
5) I tried with two different brand of CDs (Imation and TDK)

As nothing worked, i tried with another computer and another writer (2 years old) with the same Windows XP Service Pack 1. To my surprise the same problem happened when writing a CD...

So now I have 2 computers
1) Intel Pentium IV 1.6GHz with 256MB memory and 40GB Western Digital 7200rpm (the writer is a DVD reader / CD writer combo)
2) ADM Athlon XP 2800+ with 512MB memory and 80GB 7200rpm (the writer is a Sony CD-RW CRX230E5 52x24x52)

The only thing they have in common is Windows XP with Service Pack 1, and I have to say that when I bought the writer and had the first problem I had Service Pack 2 and someone told me to re-install Windows XP without Service Pack 2 because that could be the problem.
So I'm out of ideas. Both machines have been formatted with a clean install of Windows XP SP1.

What can I try next?

 

[dalfordtwo1]

had same problem. had to go five different brands cd's to find what works.

mine works with sony & office depot cd,s

 

[Liquidlen]

You will have to check a couple of items;
It is your call , but I would definitely re-install SP 2 Cleanly. There is no reason it cannot work, in the long run it would be better to solve your problem with it loaded.
Make sure Windows writing software is turned off, and disable auto start on inserting CD/DVD's
Make sure you have cleaned the writer with a cd cleaner disk etc.
Make sure you have no other authoring software (including remnant files from a deleted program)You can do a search at Nero for files that can cause conflict.
Nero has it's own error checking/log tool, read up as to how to use it and post a log here, and to Nero support.
You are going to have to continue experimenting with different media brands.
XP also has a registry setting correction for CDFS file system ,I will look for it at
Microsoft
Be patient.

 

[Al3x]

Error Message on Nero

Can someone please help me i have an error burning in nero this is a copy if the log
Alex Stojcev
Kawasaki
1A20-0206-0100-1416-1377-2198*

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 6/05/2002 11:01:14 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 8:18:06 PM
Nero version: 6.3.0.3 (Nero Express)
Recorder: <HL-DT-ST RW/DVD GCC-4240N>Version: 0110 - HA 1 TA 0 - 6.3.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST RW/DVD GCC-4240N>Version: 0110 - HA 1 TA 0 - 6.3.0.3
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK2018GAP atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4240N atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4240 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 36700160 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 222MB (228336kB)
Free physical memory: 62MB (64152kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.1.2005
CD-ROM (ISO)
11:33:13 AM #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:33:13 AM #2 Phase 90 File dlgbrnst.cpp, Line 1800
Buffer Underrun Protection activated

11:33:13 AM #3 Text 0 File Reader.cpp, Line 118
Reader running

11:33:13 AM #4 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST RW/DVD GCC-4240N running

11:33:13 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

11:33:13 AM #6 Text 0 File Burncd.cpp, Line 3101
Turn on Track-at-once, using CD-R/RW media

11:33:14 AM #7 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 12230 ( 2:45.05)

11:33:14 AM #8 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

11:33:14 AM #9 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: HL-DT-ST RW/DVD GCC-4240N;
CDR code: 00 97 26 56; OSJ entry from: Lead Data Inc.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1A 38 (LI 97:26.56), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

11:33:14 AM #10 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:33:14 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 12231 (12231) = #12231/2:43.6
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 12229 blocks [HL-DT-ST RW/DVD GCC-4240N]
--------------------------------------------------------------

11:33:14 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [HL-DT-ST RW/DVD GCC-4240N] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 25356288, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
12231 | lead-out | 1 | 0x00 | 0x41

11:33:14 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 994
Removed 2 run-out blocks from end of track 1. Length: 12231 -> 12229.

11:33:14 AM #14 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

11:33:14 AM #15 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

11:33:14 AM #16 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

11:33:14 AM #17 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 10x (1,500 KB/s)

11:33:14 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:33:14 AM #19 Text 0 File Mmc.cpp, Line 19487
Set BUFE: supported -> ON

11:33:36 AM #20 SCSI -1135 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06640000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

11:33:36 AM #21 CDR -1135 File Writer.cpp, Line 301
Write error

11:33:37 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

11:33:38 AM #23 CDR -201 File WriterStatus.cpp, Line 196
Invalid write state
HL-DT-ST RW/DVD GCC-4240N\H1 T0

11:33:38 AM #24 TRANSFER -18 File WriterStatus.cpp, Line 196
Could not perform EndTrack

11:33:38 AM #25 Text 0 File Mmc.cpp, Line 14323
<HL-DT-STRW/DVD GCC-4240N> start Close Session

11:33:38 AM #26 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

11:33:38 AM #27 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 10x (1,500 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 6/05/2002 11:01:08 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23/08/2001 1:00:00 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

I have recentlyey downloaded dvd programs and installed a variety of aspi drivers and i believe since then it has stopped working. I have checked the Aspi and they are green

 

[Liquidlen]

Alex , the first thing you should do is edit your post and remove the License number for
Software .
Next I am not sure but do you have the Writer on as the slave on that IDE channel, if so make the master.
Turn off the Autorun feature for that Drive.
Make sure you have updated the Firmware.
Clean out all other writing software completely.
pdate Nero to version 6.6+
Turn DMA on if you can on your Writer.
Let us know what happens.

 

[Al3x]

Reply

Alex , the first thing you should do is edit your post and remove the License number for
Software .
Next I am not sure but do you have the Writer on as the slave on that IDE channel, if so make the master.
Turn off the Autorun feature for that Drive.
Make sure you have updated the Firmware.
Clean out all other writing software completely.
pdate Nero to version 6.6+
Turn DMA on if you can on your Writer.
Let us know what happens.

Um the device is in my laptop, im sorry but im not sure how to turn o autorun featutre. Where can i find an updated for the firmware and where should i get nero 6.6 from. Thanx for your help buddy

 

[Liquidlen]

Right clk on the icon for your Writer in My Computer. Choose properties ,then click on the Take no Action tab and also put a check in the Always do the Selected action area.
Your drive looks like an LG ,go to their web site and download the CORRECT file for your MODEL. and then run the flash after you have read how to .Make sure you follow their procedures PRECISELY.
You can download Nero 6.6. at www.nero.com . It is as huge download so make sure you read which parts you need (You may not use their Picture software and/or Media player so only Dnld what u need)
Make sure you check the ASPI layer inNero's InfoTool

 

[Al3x]

Reply

Right clk on the icon for your Writer in My Computer. Choose properties ,then click on the Take no Action tab and also put a check in the Always do the Selected action area.
Your drive looks like an LG ,go to their web site and download the CORRECT file for your MODEL. and then run the flash after you have read how to .Make sure you follow their procedures PRECISELY.
You can download Nero 6.6. at www.nero.com . It is as huge download so make sure you read which parts you need (You may not use their Picture software and/or Media player so only Dnld what u need)
Make sure you check the ASPI layer inNero's InfoTool

ok i turned off autoplay, but when i burn cd's it not only fails in nero but, windows media player and cd buring wizard the one that comes standard with xp. I am not sure what brand my writer it i believe it is a hitachi. i checked my aspi in nero's info tool and both layers are green.

 

[mnatl]

I am having the same issue, can not burn dvd's (as data disks and video) but can burn cd-r's

using nero 6.3.1.6

system hardware:
athlon xp 2800
asus a7n8x-e duluxe
512 mb
sony dru-510a burner

system os - windows xp pro

Media used - princo 4x / dvd-r

I was able to burn dvd's till about a month ago, nothing new changed except maybe windows updates.

I have since, updated firmware and tried different media dvd-rw (verbatim brand)

I just reformated the system today and still the same error; "write error"
(I can post the error log if needed)

* The weird thing is if I take out my sony dru-510a burner and install it into my dell gx240 it Works without any problems, using same nero version and media.

Any help would be appreciated? Thanks.

 

[ZIPPY1]

i AM HAVING PROBLEMS WITH NERO TOO! IT KEEPS COMING UP WITH ERRORS ON AND OFF. I WAS WONDERING IF IT WAS A COMPATABILITY ISSUE WITH DUAL LAYER BURNERS?

 

[knuckleball]

nero burning dvd

i had same issues. only posting here cuz it took me so long to find my answers hopefully this may help some others. i had numerous errors. used nero info tool. had to install force aspi. still had issues. looked like dvd was burning but near the end of it, it would freeze and it turns out nothing was written to disc. anyhow, what fixed my issue was uninstalling my ide drives from device manager and rebooting to reintall. turns out it wasnt noticing my dvdrw drive as it should. works now. good luck

 

[Liquidlen]

Al3x;
You definitely have to turn off the windows burning software.
Go to the drive Property sheet for the writer and clear the "Enable CD recording on this drive " check mark.
If you have other background programs on eg. Screen savers ,stop them.
Make sure you have a temporary storage file (this is listed in Nero preferences)that points to a drive that has lots of free space and is defragmented.

Zippy ;
Nero was the first program to support Dual layer.
Have tried the other trouble shooting discussed above ?
What if any are your error messages?

 

[Liquidlen]

I just found these items that solved issues for me a while ago,so forgive the double post.
If you have done all the troubleshooting mentioned earlier ,than try this.

These two articles from Microsoft (KB315345,314060) talk about error messages regarding recording software,even though you might not be getting these errors from the GUI these things can still be affecting your machines, especially the upper and lower filters correction .
So as long as you are comfortable in your registry(Make a restore point First) you may want to try these one at a time .
The filter correction you should do especially if you have used (or left Windows writing software running after using Nero/Adaptec.)

 

[anonuser420]

Error Burning DVDs with Nero 7.7.5

I've only gotten one successful burn out of about ten tries and I have no clue what's wrong but I'm trying to make copies of my dvd's. I use DVD Shrink to put them onto my computer which then opens up the burn dvd in Nero.


1C80-0000-19E5-MA2X-4007-0589-****

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero API version: 7.7.5.1
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 7, 5, 1

Recorder: <PHILIPS DVD+-RW SDVD8820>Version: AD15 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : ST9120821AS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+-RW SDVD8820 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
PHILIPS DVD+-RW SDVD8820 E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1014MB (1038712kB)
Free physical memory: 559MB (573300kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.7.2007
NeroAPI
2:53:21 AM #1 Phase 112 File APIProgress.cpp, Line 285
DVD-Video files reallocation started

2:53:21 AM #2 Phase 114 File APIProgress.cpp, Line 285
DVD-Video files reallocation completed (no file modified)

2:53:21 AM #3 Phase 111 File APIProgress.cpp, Line 285
DVD-Video files sorted

2:53:21 AM #4 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

2:53:21 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

2:53:21 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)

2:53:21 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)

2:53:21 AM #8 Text 0 File Burncd.cpp, Line 3465
Turn on Disc-At-Once, using DVD media

3:05:37 AM #9 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286783 (508:10.33, 4466MB)

3:05:37 AM #10 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO

3:05:37 AM #11 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: PHILIPS DVD+-RW SDVD8820, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

3:05:37 AM #12 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW, DVD R DL.)

3:05:37 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286784 (2286784) = #2286784/508:10.34
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286784 blocks [E: PHILIPS DVD+-RW SDVD8820]
--------------------------------------------------------------

3:05:37 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [E: PHILIPS DVD+-RW SDVD8820] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4683333632, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2286784 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2286784 | 0 | 0x00
2286784 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

3:05:37 AM #15 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

3:05:37 AM #16 Phase 24 File APIProgress.cpp, Line 285
Caching of files started

3:05:37 AM #17 Text 0 File Burncd.cpp, Line 4298
Cache writing successful.

3:05:37 AM #18 Phase 25 File APIProgress.cpp, Line 285
Caching of files completed

3:05:37 AM #19 Phase 36 File APIProgress.cpp, Line 285
Burn process started at 8x (11,080 KB/s)

3:05:37 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

3:05:37 AM #21 Text 0 File DVDR.cpp, Line 3070
Recording mode: Sequential Recording Mode

3:05:37 AM #22 Text 0 File DVDR.cpp, Line 3226
Start write address at LBA 0
DVD high compatibility mode: Yes

3:05:37 AM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x0c942600: Len x648

3:05:38 AM #24 Text 0 File Cdrdrv.cpp, Line 9285
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

3:08:09 AM #25 Text 0 File Cdrdrv.cpp, Line 1303
03:08:09.484 - E: PHILIPS DVD+-RW SDVD8820 : Queue again later

3:21:46 AM #26 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 03 81 E0 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x2e1a0500: Len x10000
0x00 00 01 BA 44 1D 7F 4D B6 03 01 89 C3 F8 00 00
0x01 BD 07 EC 81 80 05 21 07 5F EF 85 81 03 00 65
0xBC 5A F4 CA A7 DD 1E BD A1 63 D5 B8 32 0F D1 23

3:21:46 AM #27 CDR -1135 File Writer.cpp, Line 301
Write error
E: PHILIPS DVD+-RW SDVD8820

3:21:46 AM #28 Text 0 File DVDR.cpp, Line 3446
EndDAO: Last written address was 229855

3:21:46 AM #29 Phase 38 File APIProgress.cpp, Line 285
Burn process failed at 8x (11,080 KB/s)

3:21:46 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.

3:21:46 AM #31 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.

3:21:46 AM #32 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

3:21:50 AM #33 SPTI -1079 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1079)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x53
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 53

3:21:52 AM #34 SPTI -1079 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1079)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x53
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 53

3:21:52 AM #35 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed

3:21:53 AM #36 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 10/18/2006 4:00:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

[Bobbye]

It took me a while to figure this out! But It runs like this:

There was an old thread by polsantos
Newcomer, in training Join Date: Dec 2004
Posts: 1
Error when burning using Nero 6.0
s anybody else experiencing this issue when trying to burn videos (as data cds) using Nero?

Then yesterday, anonuser420 Newcomer, in training, posted his own question:
Join Date: Jul 2007
Posts: 2I've had one successful attempt at burning a DVD out of about 10 tries. I am trying to make copies of my DVD's and this is the log from Nero:
Error when Burning using Nero 7.7.5.1

At some point, anonuser420 realize his problem was different so started his own thread, but used the same post used on the reply, but the post shows as Posts: 2.
Error when Burning using Nero 7.7.5.1
I've had one successful attempt at burning a DVD out of about 10 tries. I am trying to make copies of my DVD's and this is the log from Nero:

I'm putting this on both threads in case anyone else thinks they're seeing double too!