help finding faulty driver in bsod

By lar282
Feb 3, 2006
Topic Status:
Not open for further replies.
  1. hi
    Can somebody help me find whats causing the bsod? I finally gave up a few days ago thinking it was software related, but reinstalled OS completely and getting it even if it is a fresh system. removed 2 memory stick at a time, thinking its memeory fault, ran MS memory test without problem and I still get random bsod:s. I get it even if the computer is idle! The bsod doesn't look the same (to me!!) and I was hoping somebody could help me out.

    attatching 2 outputs from bsod and a PSTAT.exe output as well hoping u guys can help me track down the problem..

    Regards

    //Lasse
  2. howard_hopkinso

    howard_hopkinso Newcomer, in training Posts: 25,948   +17

    Hello and welcome to Techspot.

    Go HERE and follow the instructions.

    If that doesn`t help. Zip 5 or 6 of your latest minidumps together, and attach them here.

    Regards Howard :wave: :wave:
  3. lar282

    lar282 Newcomer, in training Topic Starter

    I posted 2 of the minidumps(the text output of them with analyze -v), I thought that was enough. Yes I did actually read that post. Hope I dind't miss anyting.Do u still want 6 of the dumps? Maybe its enough with 2 or did u look at them already?

    regards

    //Lasse
  4. howard_hopkinso

    howard_hopkinso Newcomer, in training Posts: 25,948   +17

    Yes 5 or 6 of your latest minidumps would be better.

    Regards Howard :)
  5. lar282

    lar282 Newcomer, in training Topic Starter

    I guess I have to wait for 4 more BSOD:s then.
  6. howard_hopkinso

    howard_hopkinso Newcomer, in training Posts: 25,948   +17

    I`m afraid so.

    The reason we require 5 or 6 is because it`s very difficult to make any kind of diagnosis for only 1 or 2.

    Regards Howard :)
  7. lar282

    lar282 Newcomer, in training Topic Starter

    more dumps

    added more dumps, hope its enough

    tested all memory modules one by one. byuing new motherboard today!! if nobody can prove driver fault. really need help here
  8. cpc2004

    cpc2004 Newcomer, in training Posts: 2,044

    Hi lar272,

    One minidump has 60861 memory corruption. It is the sign of faulty paging space. Re-alloacte a paging space may resolve the blue screen problem.

    BugCheck A, {9589ffff, 2, 1, 806ffa8e}
    Probably caused by : memory_corruption

    60861 errors : !nt (804e4914-80689c3d)

    MODULE_NAME: memory_corruption
    IMAGE_NAME: memory_corruption
    FOLLOWUP_NAME: memory_corruption
    DEBUG_FLR_IMAGE_TIMESTAMP: 0
    MEMORY_CORRUPTOR: LARGE
    STACK_COMMAND: .trap ffffffffb46dec9c ; kb
    FAILURE_BUCKET_ID: MEMORY_CORRUPTION_LARGE
    BUCKET_ID: MEMORY_CORRUPTION_LARGE

    Two minidumps are crashed at IRQL x'1c' which is timer IRQL. This is the sign of faulty RAM or CPU. One minidump is crashed at IRQL 1 which is the sign of faulty ram. Two minidumps are crashed with IRQL x'ff' which is the sign of faulty ram or mis-installed device driver. One minidump is crashed at KeAcquireQueuedSpinLock and it maybe the sign of overheat or faulty PSU.
  9. lar282

    lar282 Newcomer, in training Topic Starter

    Thanks for the help...

    The wierd thing is that I already switched the PSU, replaced it with a bigger bran new one.

    I also ran one memory module at a time (got 4) and the bsod:s where still there. I also tried a 512Mb mdule I had laying around(yes correct type)

    CPU temp is at 26C idle and 30C at load

    So I kind of rule out memory and psu, that leaves motherboard and CPU, but the dumps look wierd, like it is more than one thing faulty.

    wat would u guys do if u were me???
    1/new computer
    2/ new motherboard
    3/ new cpu?

    //Lasse
  10. cpc2004

    cpc2004 Newcomer, in training Posts: 2,044

    Hi,

    Run chkdsk /r and re-allocate the paging space. If it doesn't work, replace the ram.
  11. lar282

    lar282 Newcomer, in training Topic Starter

    more dumps

    chkdsk was the first thing I did. plus the fact I reformated the drive when installing the os a few days ago!

    I actually did move the pagefile.I now got one on system(200Mg) and one on d drive

    I did try different RAM. Like I said I had a 512Mb laying around and tried that still same thing.


    wierd.more dumps included

    //Lasse

    Attached Files:

  12. cpc2004

    cpc2004 Newcomer, in training Posts: 2,044

    Your windows is crashed at timer routine which is hardware problem. Do you have any update of your problem.

    Mini020506-02.dmp BugCheck 1000000A, {805d8880, 1c, 1, 804e250d}
    Probably caused by : d347bus.sys ( d347bus+d7ac )

    Mini020506-03.dmp BugCheck 1000000A, {16, 1c, 0, 804e1745}
    Probably caused by : ntkrnlmp.exe ( nt!KiWaitTest+30 )

    Mini020506-06.dmp BugCheck 10000050, {ecbcad4c, 1, 804dd99b, 3}
    Probably caused by : ntkrnlmp.exe ( nt!KiFastCallEntry+f8 )

    Mini020506-07.dmp BugCheck 1000000A, {805d8800, 1c, 1, 804e250d}
    Probably caused by : ntkrnlmp.exe ( nt!KeAcquireQueuedSpinLockAtDpcLevel+5 )
Topic Status:
Not open for further replies.


Add New Comment

TechSpot Members
Login or sign up for free,
it takes about 30 seconds.
You may also...


Get complete access to the TechSpot community. Join thousands of technology enthusiasts that contribute and share knowledge in our forum. Get a private inbox, upload your own photo gallery and more.