How to overclock my CPU speed

Status
Not open for further replies.

lordx

Posts: 32   +0
Hi fellows!
What I need to do to increase my CPU speed if CPU multiplier is locked at 11x ?

My config:

CPU Properties
CPU Type AMD Sempron, 1833 MHz (11 x 167) 2600+
CPU Alias Thoroughbred-B
CPU Stepping B0
Instruction Set x86, MMX, 3DNow!, SSE
L1 Code Cache 64 KB
L1 Data Cache 64 KB
L2 Cache 256 KB (On-Die, Full-Speed)

CPU Physical Info
Package Type 453 Pin PGA
Package Size 4.95 cm x 4.95 cm
Transistors 37.6 million
Process Technology 6Mi, 0.13 um, CMOS, Cu
Die Size 84 mm2


Motherboard Properties
Motherboard ID 08/04/2004-nVidia-nForce-A7N8X2.0C-00
Motherboard Name Asus A7N8X

Front Side Bus Properties
Bus Type DEC Alpha EV6
Bus Width 64-bit
Real Clock 167 MHz (DDR)
Effective Clock 333 MHz
Bandwidth 2666 MB/s

Memory Bus Properties
Bus Type DDR SDRAM
Bus Width 64-bit
Real Clock 200 MHz (DDR)
Effective Clock 400 MHz
Bandwidth 3200 MB/s

Chipset Bus Properties
Bus Type HyperTransport v1.0
Bus Width 8-bit

Motherboard Physical Info
CPU Sockets/Slots 1 Socket 462
Expansion Slots 5 PCI, 1 AGP Pro
RAM Slots 3 DDR DIMM
Form Factor ATX
Motherboard Size 240 mm x 300 mm
Motherboard Chipset nForce2-SPP
Extra Features CPU Overheating Protection, Q-Fan



Memory Module Properties
Serial Number None
Module Size 256 MB (2 rows, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC3200 (200 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh

Memory Timings
@ 200 MHz 2.5-4-4-8 (CL-RCD-RP-RAS)
@ 166 MHz 2.0-4-4-7 (CL-RCD-RP-RAS)

Memory Module Features
Early RAS# Precharge Not Supported
Auto-Precharge Not Supported
Precharge All Not Supported
Write1/Read Burst Not Supported
Buffered Address/Control Inputs Not Supported
Registered Address/Control Inputs Not Supported
On-Card PLL (Clock) Not Supported
Buffered DQMB Inputs Not Supported
Registered DQMB Inputs Not Supported
Differential Clock Input Supported
Redundant Row Address Not Supported

Memory Timings:
CAS Latency (CL) 2.5T
RAS To CAS Delay (tRCD) 4T
RAS Precharge (tRP) 4T
RAS Active Time (tRAS) 8T
Row Cycle Time (tRC) 13T
Row Refresh Cycle Time (tRFC) 15T
Command Rate (CR) 1T
RAS To RAS Delay (tRRD) 2T

Memory Slots:
DRAM Slot #1 256 MB (PC3200 DDR SDRAM)

AGP Controller:
AGP Version 3.00
AGP Status Disabled
AGP Device nVIDIA GeForce FX 5500
AGP Aperture Size 64 MB
Supported AGP Speeds 1x, 2x, 4x, 8x
Current AGP Speed 4x
Fast-Write Supported, Disabled
Side Band Addressing Supported, Disabled
 
Status
Not open for further replies.
Back