MACHINE_CHECK_EXCEPTION 0x0000009C (0x0000000A, 0x80545FF0, 0xB20000000, 0x00070F0F)

Status
Not open for further replies.
I was doing nothing. My computer was idle...sitting on the desktop. I look over and I have a BSOD. It said:

MACHINE_CHECK_EXCEPTION

0x0000009C (0x0000000A, 0x80545FF0, 0xB20000000, 0x00070F0F)

Belarc Advisor of my system:

Operating System:
Windows XP Professional Service Pack 2 (build 2600)

Processor:
2.00 gigahertz AMD Athlon 64
128 kilobyte primary memory cache
512 kilobyte secondary memory cache

Main Circuit Board:
Board: Soyo CK8 Dragon Plus
Bus Clock: 201 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 05/31/2004

Memory Modules:
256 Megabytes Installed Memory

Display:
NVIDIA GeForce4 MX 4000 [Display adapter]
 
Hello and welcome to Techspot.

0x0000009C: MACHINE_CHECK_EXCEPTION

This is a hardware issue: an unrecoverable hardware error has occurred. The parameters have different meanings depending on what type of CPU you have but, while diagnostic, rarely lead to a clear solution. Most commonly it results from overheating, from failed hardware (RAM, CPU, hardware bus, power supply, etc.), or from pushing hardware beyond its capabilities (e.g., overclocking a CPU).

As you can see from the above. A bugcheck of 9C, is almost always caused by faulty hardware.

Start, by going HERE and following the instructions.

Regards Howard :wave: :wave:
 
Hi,

Your hardware error code is _VAL_UC_EN_PCC_BUSCONNERR_30F which means time out of Bus and Interconnect Error.

The time out which maybe caused by IDE Drive, M/B or RAM. If yoi overclock the CPU, change it to factory value. Downclock the ram may resolve the machine error problem.
 
Status
Not open for further replies.
Back