Mainboard: HP 0A60h

[h8ter]

hi i have a problem with my pc lets see i have onbord graphics on my Mainboard : HP 0A60h witch is the mainboard model Video Card : Intel(R) Q965/Q963 Express Chipset Family is the graphics video onboard card i have purchased a pci x 1300 vision tek and upon installation i get nothing on my video tried to check for an option in my bios to set it to pci use and can not see anything relevent to my issue here are my total system spec:



Mainboard : HP 0A60h
Chipset : Intel Q963
Processor : Intel Pentium XE 945 @ 3400MHz
Physical Memory : 1024MB (1 x 1024 DDR2-SDRAM )
Video Card : Intel(R) Q965/Q963 Express Chipset Family
Hard Disk : SAMSUNG HD080HJ/P (80GB)
Hard Disk : Western Digital WD2000JD-00HBB0 (200GB)
CD-Rom Drive : Toshiba-Samsung CD-ROM TS-H193A
CD-Rom Drive : FQT 9MN0DQV0T6 SCSI CdRom Device
Monitor Type : COMPAQ COMPAQ FS940 - 18 inches
Network Card : Broadcom NetXtreme BCM5755 Gigabit Ethernet PCIe
Operating System : Microsoft Windows XP Professional 5.01.2600 Service Pack 3 (32-bit)
DirectX : Version 9.0c (May 2009)

any help would be most gratefull

 

[Tmagic650]

Does the on-board video still work?

 

[h8ter]

mainbord

yea the onboard video still works and really well but the x1300 video card is a better vgp and thank you for you help if there is any one with a mainboard manuel so i can find out if and where a jumper is to switch the primary video display to pci it would be awesome cant find one on line thanks all