Mini dumps.......please help

By Mikell808
Mar 13, 2007
  1. The following have occured over the last couple of weeks, I just built this system and have warranty left on the hardware if these a problem. I would appreciate any assitance.

    I am running XP Home sp2, dual core Intel 2800, with 1 gig of DDR2

    Error code 10000050, parameter1 f0e1b3ec, parameter2 00000000, parameter3 8056b7fd, parameter4 00000000.

    Error code 10000050, parameter1 e606508c, parameter2 00000001, parameter3 bf80170a, parameter4 00000002.

    Error code 1000000a, parameter1 00a00016, parameter2 0000001c, parameter3 00000000, parameter4 804e5deb.

    Error code 1000000a, parameter1 00000000, parameter2 0000001c, parameter3 00000000, parameter4 804e1637.

    Error code 1000000a, parameter1 0a27001d, parameter2 00000002, parameter3 00000001, parameter4 8051a28d.

    Error code 1000008e, parameter1 c0000005, parameter2 bf0d3e03, parameter3 f35bbc04, parameter4 00000000.

    Error code 1000007f, parameter1 0000000d, parameter2 00000000, parameter3 00000000, parameter4 00000000.

    Error code 00000019, parameter1 00000020, parameter2 e16273d8, parameter3 e1627408, parameter4 0c060608.
  2. cpc2004

    cpc2004 TS Evangelist Posts: 1,994

    One minidump is crashed at 7F with BP1 d and this is the symptom of hardware error. Two minidumps are crashed at IRQL x'1c' (ie the clock level IRQL) and it is also the symptom of hardware error. Probably the faulty hardware maybe RAM. CPU or M/B. There have no reliable tool to diagnostic CPU and M/B. Run memtest to stress test the ram.
  3. Mikell808

    Mikell808 TS Rookie Topic Starter

    Here is what I have done since the reply and what is occuring now. I knew the Hard drive had bad sectors, so I replace the drive, reloaded fresh new OS this time XP Pro, and software, did all updates. Ran Memtester86 over night, with no errors. Here is my current list of mini dumps that have occured since replaceing the hard drive. Also want to mention that the system shuts down mid stream periodically.

    Error code 000000a0, parameter1 00000200, parameter2 00000009, parameter3 00000000, parameter4 80567f10.

    Error code 1000000a, parameter1 00000028, parameter2 00000002, parameter3 00000000, parameter4 804ee667.

    Error code 0000004e, parameter1 00000002, parameter2 00026d9f, parameter3 0003ffaf, parameter4 00000001.

    Error code 1000000a, parameter1 8766b410, parameter2 00000001, parameter3 00000000, parameter4 804f5254.
  4. Mikell808

    Mikell808 TS Rookie Topic Starter

    This is an update since 3/15. I have installed a new power supply, reformatted, re-loaded all software and drivers again, also did a full surface scan of the drive to make sure no damage was done by the previous crashes, ran. Still had problems so I played around with the dual core and dual Ram. I removed one ram chip, tested each individually and had not problems. Also tried each chip seperatly in both slots, I am under the belief that this will utilize both processor cores independently. Now when I put both chips back in place and am using both cores I get the Dumps again. Here is the most current lists. I have, please advise

    Error code 0000004e, parameter1 00000002, parameter2 0003b8b1, parameter3 0003ffaf, parameter4 0000a9c9.

    Error code 1000000a, parameter1 28d5c648, parameter2 0000001c, parameter3 00000000, parameter4 804dc6c0.

    Error code 0000004e, parameter1 00000099, parameter2 00006802, parameter3 00000003, parameter4 00000000.

    Error code 100000d1, parameter1 00000009, parameter2 0000001c, parameter3 00000001, parameter4 85f81da9.

    Error code 1000008e, parameter1 c0000005, parameter2 805b17c7, parameter3 f343da68, parameter4 00000000.

    Error code 000000f4, parameter1 00000003, parameter2 8633c020, parameter3 8633c194, parameter4 80604418.
  5. Tmagic650

    Tmagic650 TS Ambassador Posts: 17,233   +234

    Was this system ever running stable? If not, replace the motherboard first
  6. Mikell808

    Mikell808 TS Rookie Topic Starter

    Motherboard, processor, Ram and power supply all brand new. I have been having problems since I built it. Replaced the power supply and started over end of last week. Not as many dumps but still shutting down mid stream and I can't see any pattern between activies. Just replaced the Video card today. I am hoping to get a better understanding on what those Dumps are pointing too. Is there a web page that identifies what the codes mean? Or can someone let me know what they are pointing too.

    Here is another from today:

    Error code 10000050, parameter1 c94480de, parameter2 00000000, parameter3 8056e5e4, parameter4 00000000.
  7. Tmagic650

    Tmagic650 TS Ambassador Posts: 17,233   +234

    Replace the "New" motherboard...
  8. Mikell808

    Mikell808 TS Rookie Topic Starter

Topic Status:
Not open for further replies.

Similar Topics

Add New Comment

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...