TechSpot

my cpu help plz

By ppsssooo
Jun 1, 2005
Topic Status:
Not open for further replies.
  1. i am dum at least thats what i think bcuz i am making a pc but i just noticed something i have a 3.0ghz prescot cpu i just checked my mother board it says its a HT1683 Northbridge and HT1563 Southbridge Chipset so does that mean i cant use my cpu that would realy suck
     
  2. ppsssooo

    ppsssooo TS Rookie Topic Starter Posts: 67

    this all the data i have on my board

    • One Socket 478 supports the Intel® Pentium® 4 processor with Hyper Threading Technology ready, support 800/533/400MHz FSB

    Memory

    • Two DDR 184-pin 2.5V DIMM Sockets (DDR266/333/400)

    • Maximum: 2GB

    Chipset

    • HT1683 Northbridge and HT1563 Southbridge Chipset

    • Supports six USB 2.0 ports

    • Supports four 32-bits PCI slots of arbitration and decoding for all integrated functions and LPC bus.

    • Audio – C-Media CMI9738 AC’97 Codec(4 Channel)

    • 8x AGP Support

    • LAN – Realtek 10/100BaseT LAN onboard

    System BIOS

    • AMI 2Mb Firmware Hub

    • Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI

    • Support ACPI revision 1.0 specification

    Modem

    Optional 56K V.90 CNR Modem

    Expansion Slots

    • 4 PCI slots, 1 AGP slot (8x), 1 CNR slot

    I/O Interface

    Back Panel I/O Ports

    • PS/2 keyboard and mouse connectors

    • Four USB2.0 Ports and a LAN connector

    • One EPP/ECP mode parallel port

    • One 16550 high-speed serial I/O port

    • Audio ports (Mic, Audio-in, Audio-out)

    Onboard ports, headers and others

    •Two IDE connectors supports four IDE devices (Ultra DMA 66/100/133)

    • One FDD connector supports 360K~2.88M Byte, 3 Mode FDDs or LS120

    • P4 ATX Power Supply Connector (4-Pin 12V power connector require)

    • USB Card Reader Connector (share one USB port from back panel)

    • IrDA header

    • Internal PC speaker header

    • CD ROM/DVD Audio Input header

    • 2 Extra USB2.0 onboard header

    • HDD LED, Reset Switch, Suspend LED, Power Switch headers

    • CPU and System Fan headers

    Special Features

    • Supports Wake on LAN, Wake on Modem, Wake on Alarm, Interrupt Wake-Up from Keyboard/Mouse,

    Form Factor & Layers

    • ATX (305mm*195mm
     
  3. RealBlackStuff

    RealBlackStuff TS Rookie Posts: 8,165

    You left out the ONE piece of information that we need!
    What is the make and exact model of that motherboard?

    A Prescott normally should fit on a Socket 478 board, so I guess you're OK.
     
  4. ppsssooo

    ppsssooo TS Rookie Topic Starter Posts: 67

    its a PC CHIPS M916 PENTIUM 4 800FSB LAN DDR 400 and down below is a picture
     
  5. RealBlackStuff

    RealBlackStuff TS Rookie Posts: 8,165

    You're ready to go...
     
  6. Didou

    Didou Bowtie extraordinair! Posts: 5,899

    If the Prescott is in LGA775 format, it's a no-go.
     
Topic Status:
Not open for further replies.


Add New Comment

TechSpot Members
Login or sign up for free,
it takes about 30 seconds.
You may also...


Get complete access to the TechSpot community. Join thousands of technology enthusiasts that contribute and share knowledge in our forum. Get a private inbox, upload your own photo gallery and more.