Need help with Hard Drive to Motherboard

Status
Not open for further replies.
Yes, they should work fine. The motherboard has 4 sata ports, and that drive will take one of those ports. The motherboard also should come with the data cable, so you're covered in that area as well. The thing to consider is whether your power supply has a sata power connector, like this.
sata9cr.jpg

There are also molex(4pin) to sata adapters, so even if you don't have one, you can get an adapter. Sata drives can sometimes be troublesome to setup, but I doubt you'll have problems with that board, as it's newer and name brand.
Good luck on the system.
 
Status
Not open for further replies.
Back