Nero dvd burn process fails

Status
Not open for further replies.
I am using nero 7, while copying a dvd movie, caching of image is fine, but the burn on to a double layer dvd fails even at a speed of 2.4x. Kinldy help.
The following is the log file. The end of the log file is only reproduced due to constraint of its size.


Image file name: <I:\NeroVision\TempImage.nrg>

8:03:27 PM #5 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

8:04:13 PM #6 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3720559 (826:47.34, 7266MB)

8:04:13 PM #7 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

8:04:13 PM #8 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: SONY DVD RW DRU-810A, Media type: DVD+R9 Double Layer

8:04:13 PM #9 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL.)

8:04:13 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 3720560 (3720560) = #3720560/826:47.35
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3720560 blocks [H: SONY DVD RW DRU-810A]
--------------------------------------------------------------

8:04:13 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [H: SONY DVD RW DRU-810A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7619706880, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3720560 | lead-out | 1 | 0x41 | 0x00

8:04:13 PM #12 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

8:04:13 PM #13 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

8:04:13 PM #14 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2.4x (3,324 KB/s)

8:04:13 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

8:04:14 PM #16 SPTI -1066 File SCSIPassThrough.cpp, Line 290
H: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x0357f600: Len x804

8:04:14 PM #17 Text 0 File DVDPlusDualLayer.cpp, Line 636
L0 Data Zone Capacity set to 2084960 (1FD060h, 4072MB) -> OK, confirmed setting

8:04:14 PM #18 CDR -1205 File DVDPlusDualLayer.cpp, Line 663
Burning Layer 1

8:04:14 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 673
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

8:04:14 PM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 290
H: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x0357f600: Len x804

8:04:14 PM #21 Text 0 File DVDR.cpp, Line 6541
Drive: SONY DVD RW DRU-810A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

8:04:14 PM #22 CDR -1207 File DVDR.cpp, Line 5676
Book Type automatically set to: DVD-ROM

8:04:14 PM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

8:09:37 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 290
H: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 07 54 A0 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
Buffer x04190000: Len x10000
0x00 00 01 BA 45 55 BC 20 D4 AD 01 89 C3 F8 00 00
0x01 BD 07 EC 81 80 05 21 55 6F 4A 3B 81 03 00 64
0x23 E3 42 0A EC E3 CD A6 C0 25 6F 21 3F 98 93 20

8:09:37 PM #25 CDR -1135 File Writer.cpp, Line 302
Write error
H: SONY DVD RW DRU-810A

8:09:37 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

8:09:37 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

8:09:44 PM #28 Phase 127 File dlgbrnst.cpp, Line 1730
Generating DVD high compatibility borders

8:11:44 PM #29 Phase 129 File dlgbrnst.cpp, Line 1730
Generating DVD borders completed successfully

8:11:44 PM #30 Text 0 File DVDR.cpp, Line 6541
Drive: SONY DVD RW DRU-810A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

8:11:44 PM #31 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 2.4x (3,324 KB/s)


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) [/COLOR]
 
Most likely it is the media you are using. Try a different brand of DVD. I had the same problem with a new Lite-On DVD burner.
 
What kind of DVD movie is this? if it is a commercial DVD movie Nero will not burn it because of the copy protection. otherwise I agree with Fastco, it would most likely be a media compaitability issue with the media you are using. if that is the case my advice is to avoid memorex,or cheap generic house brands and get verbatim, taiyo yuden or maxell media.
 
Try Memorex or Maxell media to see what happens. We have that problem a lot with Nero when we use Sony or Imation CD's
 
I would go into device manager and go into the properties of the IDE Controller that the DVD-RW drive is on: it shouldn’t be PIO; it should be DMA if available.
 
Also include the Sony DRU-810A CDRW in your troubles search. We find very high failure and trouble rates in that model... the highest of any product Wal-Mart sells. Failure to copy is a common problem with it, particularly if it has more than 6 months use.
 
Having the same problem. HP DVD writer was working fine, then would not write DVDs, would however write CDs. Went out and bought new DVD writer and now it writes data to DVD but not movies. It starts out formatting the mpg or avi file to HD tmp then when it starts to burn, nero hangs up then stop then my whole XP Pro system becomes unstable.

Have tried everything I know of: Defrag, Registry Scrub, Nero Reinstall, Nero Repair, Nero Web Site, Google...
Help, at the end my rope with this. Does anyone have a solution or input?
 
I hate Sony burners... High priced crap if you ask me... Go Lite-On or NEC, lower price, great performance, compatibility and trouble free

spyder said:
Having the same problem. HP DVD writer was working fine, then would not write DVDs, would however write CDs. Went out and bought new DVD writer and now it writes data to DVD but not movies. It starts out formatting the mpg or avi file to HD tmp then when it starts to burn, nero hangs up then stop then my whole XP Pro system becomes unstable.

Have tried everything I know of: Defrag, Registry Scrub, Nero Reinstall, Nero Repair, Nero Web Site, Google...
Help, at the end my rope with this. Does anyone have a solution or input?

Is your copy of XP updated to SP2 and current?
 
Please do I need a double layer Dvd writer b4 I can burn a DL DVD or can I use a normal Dvd writer to burn it.pls reply ASAP!
 
Using Nero, you can use any DVD burner you wish... buy you will need a Double layer to deal with double layer discs
 
Status
Not open for further replies.
Back