Nforce4-A939 Stops at post

By azbiker
Nov 24, 2007
Topic Status:
Not open for further replies.
  1. I have a Nforce4-A939 MB with Athlon 64 -3500 Processor, a Nvidea Gforce 8600GTS Videocard, I have 3 Sata 160G HD and 2 EIDE 120GHD, a DVD/DL-RW , and over 1.Gb Memory installed. My problem is it boots up to the post I see the following on the Screen:
    Phoenix-Award Bios v6 1984-2003,
    nForce4-A939 Ver 1.0c 03/30/2005
    Main Processor:AMD Athlon 64 Processor 3500+
    Memory Testing : 1048575K OK
    Memory Information: Dual Channel, 128-bit

    At the bottom I get :
    Press DEL to enter Setup, F12 to enter Boot Menu
    03/30/25-NF-CK804-6A61fe19c-00

    But I get no response from my keyboard or mouse I Have tried a USB and a PS2 set with no success.

    ANYONE have any Ideas???? :(
    I have been with out a real system for over 2 months and the laptop don't get it. I think I am having withdrawals.
  2. Tmagic650

    Tmagic650 TS Ambassador Posts: 20,673   +152

    Can you get into the bios setup screen at all? The bios CMOS chip may be corrupt. Unplug the computer and remove the "button" battery for a couple of minutes. Put the battery back in and try booting the system
Topic Status:
Not open for further replies.


Add New Comment

TechSpot Members
Login or sign up for free,
it takes about 30 seconds.
You may also...


Get complete access to the TechSpot community. Join thousands of technology enthusiasts that contribute and share knowledge in our forum. Get a private inbox, upload your own photo gallery and more.