Problem with Linksys print server

By eons
Aug 20, 2007
  1. So I got this linksys wvc200 print server the wireless one. It works fine, but it sets the printer that the server is hooked up at to be the default printer, and while the print server utility is running it wont let me change the default printer. I'm trying to make it so i can easily print from any of the printers without having to go through exiting the program and going to the printers and switching the default printer. Any solutions??
  2. raybay

    raybay TS Evangelist Posts: 7,241   +9

    Your error is in the setup of network places. What is the IP of the printer? That is critical. How do you attempt to access the wvc200 print server? Through a wired or wireless router or access point?
    Can you see the printer in My Network Places? If not, your setup is incorrect for the printer... more than it is a wireless problem.
    Tell us the brand and model of printer.
  3. jobeard

    jobeard TS Ambassador Posts: 8,945   +584

    disconnect from the network.

    now go cp->Printer and Faxes
    right click on the printer you want to use as the default, pull down to
    set as default

    When printing a document, you do not have to always use the default device,
    click print
    the dialog appears and you can select an alternative printer.

    you can also click Print Setup, select the printer and the OK.
    that will be the target device for that document until you quit/exit the program.
  4. eons

    eons TS Rookie Topic Starter

    thanks guys
Topic Status:
Not open for further replies.

Similar Topics

Create an account or login to comment

You need to be a member in order to leave a comment
TechSpot Members
Login or sign up for free,
it takes about 30 seconds.
You may also...

Get complete access to the TechSpot community. Join thousands of technology enthusiasts that contribute and share knowledge in our forum. Get a private inbox, upload your own photo gallery and more.