Hey guys, I need a K56Flex or a V.90 firmware for my PT-3012 Puretek modem. I went to the Puretek web site but they only have the drivers. Thx.
Doesn't that thing have a Conexant(Rockwell) ACF chipset? I can't remember. If so check here and see if this is what you need.
I seemed to be able to get connected. But it takes a long time "Verifying username and password". I had uncheck "Log on to network" but it's still stays at "Verifying username..........." here is the log of the connection: Any ideas on what is wrong?
Btw, sometimes I get this : 06-04-2002 20:12:44.44 - V.90 External Fax Voice Modem in use. 06-04-2002 20:12:44.44 - Modem type: V.90 External Fax Voice Modem 06-04-2002 20:12:44.44 - Modem inf path: PURETE~1.INF 06-04-2002 20:12:44.44 - Modem inf section: Modem_8 06-04-2002 20:12:44.69 - 57600,N,8,1 06-04-2002 20:12:44.94 - 115200,N,8,1 06-04-2002 20:12:44.95 - Initializing modem. 06-04-2002 20:12:44.95 - Send: AT<cr> 06-04-2002 20:12:44.95 - Recv: AT<cr> 06-04-2002 20:12:44.95 - Recv: <cr><lf>OK<cr><lf> 06-04-2002 20:12:44.95 - Interpreted response: Ok 06-04-2002 20:12:44.95 - Send: AT&FE0V1&D2&C1S0=0S95=45<cr> 06-04-2002 20:12:44.95 - Recv: AT&FE0V1&D2&C1S0=0S95=45<cr> 06-04-2002 20:12:44.96 - Recv: <cr><lf>OK<cr><lf> 06-04-2002 20:12:44.96 - Interpreted response: Ok 06-04-2002 20:12:44.96 - Send: ATS7=255S30=0L0M0\N3%C3&K3B0N1X4<cr> 06-04-2002 20:12:44.97 - Recv: <cr><lf>OK<cr><lf> 06-04-2002 20:12:44.97 - Interpreted response: Ok 06-04-2002 20:12:44.98 - Dialing. 06-04-2002 20:12:44.98 - Send: ATDT;<cr> 06-04-2002 20:12:47.37 - Recv: <cr><lf>OK<cr><lf> 06-04-2002 20:12:47.37 - Interpreted response: Ok 06-04-2002 20:12:47.38 - Dialing. 06-04-2002 20:12:47.38 - Send: ATDT####<cr> 06-04-2002 20:13:25.33 - Recv: <cr> 06-04-2002 20:13:25.33 - Interpreted response: Informative 06-04-2002 20:13:25.33 - Recv: <lf> 06-04-2002 20:13:25.33 - Interpreted response: Informative 06-04-2002 20:13:25.33 - Recv: CARRIER 34667 06-04-2002 20:13:25.33 - Interpreted response: Informative 06-04-2002 20:13:26.33 - Recv: <cr> 06-04-2002 20:13:26.33 - Interpreted response: Informative 06-04-2002 20:13:26.33 - Recv: <lf> 06-04-2002 20:13:26.33 - Interpreted response: Informative 06-04-2002 20:13:29.05 - Recv: <cr> 06-04-2002 20:13:29.05 - Interpreted response: Informative 06-04-2002 20:13:29.05 - Recv: <lf> 06-04-2002 20:13:29.05 - Interpreted response: Informative 06-04-2002 20:13:29.05 - Recv: PROTOCOL: LAP-M 06-04-2002 20:13:29.05 - Interpreted response: Informative 06-04-2002 20:13:29.05 - Recv: <cr> 06-04-2002 20:13:29.05 - Interpreted response: Informative 06-04-2002 20:13:29.05 - Recv: <lf> 06-04-2002 20:13:29.05 - Interpreted response: Informative 06-04-2002 20:13:29.05 - Recv: <cr> 06-04-2002 20:13:29.05 - Interpreted response: Informative 06-04-2002 20:13:29.05 - Recv: <lf> 06-04-2002 20:13:29.05 - Interpreted response: Informative 06-04-2002 20:13:29.05 - Recv: COMPRESSION: V.42BIS 06-04-2002 20:13:29.05 - Interpreted response: Informative 06-04-2002 20:13:29.06 - Recv: <cr> 06-04-2002 20:13:29.06 - Interpreted response: Informative 06-04-2002 20:13:29.06 - Recv: <lf> 06-04-2002 20:13:29.06 - Interpreted response: Informative 06-04-2002 20:13:29.06 - Recv: <cr> 06-04-2002 20:13:29.06 - Interpreted response: Informative 06-04-2002 20:13:29.06 - Recv: <lf> 06-04-2002 20:13:29.06 - Interpreted response: Informative 06-04-2002 20:13:29.06 - Recv: CONNECT 34667 06-04-2002 20:13:29.06 - Interpreted response: Connect 06-04-2002 20:13:29.06 - Connection established at 34667bps. 06-04-2002 20:13:29.06 - Error-control on. 06-04-2002 20:13:29.06 - Data compression on. But there are times when after "Verifying username and password for a long time, it disconnects. This is when there is no protocol and compression.
I didn't say they would work, I told you to see if that was what you needed. I saw the note about it being for Australia only but those were the only ones I knew about.
I have that very same modem... And I also do have the correct V.90 firmware for it which I downloaded a few years ago when it actually was up on Purtek's site... Though I think it's a specific firmware for Sweden, can't remember... I can send it if you like, just send me a mail and ask nicley