TechSpot

Review my Hijackthis please

By Korokoku
Sep 28, 2006
  1. I have been having many issues lately. I attached my hijackthis.log as instructed.

    Thanks in advance.
     
  2. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 24,177   +19

    Hello and welcome to Techspot.

    Your system is infected with quite a variety of nasties.

    It also appears you`re not running any antivirus or firewall software. This is a huge security risk.

    Download and install the free AVG or Avast antivirus programmes and either the free Zonealarm or Kerio firewall programmes. You can get them HERE, HERE, HERE and HERE.

    Install whichever firewall you chose, followed by whichever antivirus programme you chose. Reboot your system the required number of times. Run the antivirus updates.

    Then, go HERE and follow the instructions exactly.

    Post fresh HJT and Ewido logs as attachments into this thread, only after doing the above.

    Regards Howard :wave: :wave:

    This thread is for the use of Korokoku only. Please don`t post your own virus/spyware problems in this thread. Instead, open a new thread in our security and the web forum.
     
  3. Korokoku

    Korokoku TS Rookie Topic Starter

    I performed all the instructions from both threads.

    Here are the two log files after I completed them all.
     
  4. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 24,177   +19

    Download the Pocket killbox programme from HERE. Extract it but don`t run it yet.

    You might want to copy and paste these instructions into a notepad file. Then you can have the file open in safe mode, so you can follow the instructions easier.

    Turn off system restore.(XP/ME only) See how here.> http://www.bleepingcomputer.com/forums/tutorial56.html

    Boot into safe mode, under your normal user name(NOT THE ADMINISTRATOR ACCOUNT). See how here.> http://www.bleepingcomputer.com/forums/tutorial61.html

    In Windows Explorer, turn on "Show all files and folders, including hidden and system". See how here.> http://www.bleepingcomputer.com/forums/tutorial62.html

    Go to add remove programmes in your control panel and uninstall anything to do with(if there).

    Printview

    Close control panel.

    Click start/run and type services.msc into the run box and press the enter key.

    When the window appears, maximise it. Double click on the following services(if there) and select stop if they are running. Set the startup type to disabled. Click apply/ok for each service you disable.

    winlog

    Close the services window.


    Open your task manager, by holding down the ctrl and alt keys and pressing the delete key.

    Click on the processes tab and end process for(if there).

    pvmodule.exe
    dfndre_5.exe
    kybrde_5.exe
    nwnme_5.exe
    oofhkexA.exe
    winlog.exe

    Close task manager.

    Run HJT with no other programmes open(except notepad). Click the scan button. Have HJT fix the following, by placing a tick in the little box next to(if there).

    R3 - URLSearchHook: (no name) - {9C4DB7AC-256D-56BF-10F6-71E2ED7476E7} - C:\WINDOWS\system32\dycrgbig.dll

    R3 - URLSearchHook: (no name) - _{CFBFAE00-17A6-11D0-99CB-00C04FD64497} - (no file)

    R3 - URLSearchHook: (no name) - {9D4DB7AD-2519-56B8-10F6-70E29B047690} - C:\WINDOWS\system32\dycrgbig.dll

    O2 - BHO: (no name) - {9C4DB7AC-256D-56BF-10F6-71E2ED7476E7} - C:\WINDOWS\system32\dycrgbig.dll

    O2 - BHO: (no name) - {9D4DB7AD-2519-56B8-10F6-70E29B047690} - C:\WINDOWS\system32\dycrgbig.dll

    O2 - BHO: PrintViewBHO Class - {D4E0C464-30CE-4075-9A10-71FD106C2847} - C:\PROGRA~1\PRINTV~1\PRINTH~1.DLL

    O4 - HKLM\..\Run: [defender] C:\\dfndre_5.exe

    O4 - HKLM\..\Run: [keyboard] C:\\kybrde_5.exe

    O4 - HKLM\..\Run: [newname] C:\\nwnme_5.exe

    O4 - HKLM\..\Run: [oofhkexA] C:\WINDOWS\oofhkexA.exe

    O4 - HKLM\..\Run: [PVModule] C:\PROGRA~1\PRINTV~1\pvmodule.exe

    O4 - HKLM\..\RunServices: [winlog] winlog.exe

    O4 - HKCU\..\Run: [Obur] "C:\WINDOWS\WNSXS~1\taskmgr.exe" -vt yazb

    O4 - HKCU\..\Run: [Bdfr] C:\Documents and Settings\Adam09\Application Data\F?nts\smss.exe

    Fix all 018-Protocol entries.

    Click on the fix checked button.

    Close HJT.

    Locate and delete the following bold files and/or directories(if there).

    C:\Documents and Settings\Adam09\Application Data\F?nts\smss.exe
    C:\WINDOWS\WNSXS~1\taskmgr.exe

    winlog.exe Search your system for this file and delete all instances of it.

    C:\PROGRA~1\PRINTV~1 Delete the entire folder.
    C:\WINDOWS\oofhkexA.exe

    C:\\nwnme_5.exe
    C:\\kybrde_5.exe
    C:\\dfndre_5.exe

    Delete all files in Ewido quarantine.

    Run the killbox.exe file. When it loads type the full path to the file you would like to delete in the field and check the delete file on reboot button. press the Delete File button (looks like a red circle with a white X). It will prompt you to reboot, select no until you have finished inputting the files you want to delete, only then allow it to reboot and hopefully your files will now be deleted.

    This is the filepath you need to enter into killbox.

    C:\WINDOWS\system32\dycrgbig.dll

    Once your system has rebooted, turn system restore back on and rehide your protected OS files.

    Post a fresh HJT log and let me know how your system is running.

    Regards Howard :)

    This thread is for the use of Korokoku only. Please don`t post your own virus/spyware problems in this thread. Instead, open a new thread in our security and the web forum.
     
  5. Korokoku

    Korokoku TS Rookie Topic Starter

    Here is my hijackthis log after I followed the new instructions.
     
  6. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 24,177   +19

    Do you have the Salfeld Personal Security tool installed on your system?

    The reason I ask is the winlog.exe entry in your HJT log can be good or bad depending on where it`s come from.

    This is the entry in question. O4 - HKLM\..\RunServices: [winlog] winlog.exe

    Other than that, your HJT log is clean.

    Regards Howard :)

    This thread is for the use of Korokoku only. Please don`t post your own virus/spyware problems in this thread. Instead, open a new thread in our security and the web forum.
     
  7. Korokoku

    Korokoku TS Rookie Topic Starter

    I don't have Salfeld Personal Security tool I don't think.
     
  8. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 24,177   +19

    In that case, do the following.

    You might want to copy and paste these instructions into a notepad file. Then you can have the file open in safe mode, so you can follow the instructions easier.

    Turn off system restore.(XP/ME only) See how here.> http://www.bleepingcomputer.com/forums/tutorial56.html

    Boot into safe mode, under your normal user name(NOT THE ADMINISTRATOR ACCOUNT). See how here.> http://www.bleepingcomputer.com/forums/tutorial61.html

    In Windows Explorer, turn on "Show all files and folders, including hidden and system". See how here.> http://www.bleepingcomputer.com/forums/tutorial62.html

    Click start/run and type services.msc into the run box and press the enter key.

    When the window appears, maximise it. Double click on the following services(if there) and select stop if they are running. Set the startup type to disabled. Click apply/ok for each service you disable.

    winlog

    Close the services window.

    Open your task manager, by holding down the ctrl and alt keys and pressing the delete key.

    Click on the processes tab and end process for(if there).

    winlog.exe

    Close task manager.

    Run HJT with no other programmes open(except notepad). Click the scan button. Have HJT fix the following, by placing a tick in the little box next to(if there).

    O4 - HKLM\..\RunServices: [winlog] winlog.exe

    Click on the fix checked button.

    Close HJT.

    Search your system for the winlog.exe file and make a note of the full filepath.

    Run the killbox.exe file. When it loads type the full path to the file you would like to delete in the field and check the delete file on reboot button. press the Delete File button (looks like a red circle with a white X). It will prompt you to reboot, select no until you have finished inputting the files you want to delete, only then allow it to reboot and hopefully your files will now be deleted.

    Type the full filepath to winlog.exe

    Once your system has rebooted, turn system restore back on and rehide your protected OS files.

    Post a fresh HJT log.

    Regards Howard :)

    This thread is for the use of Korokoku only. Please don`t post your own virus/spyware problems in this thread. Instead, open a new thread in our security and the web forum.
     
  9. Korokoku

    Korokoku TS Rookie Topic Starter

    Here is hopefully my final hijackthis log.

    Thanks for all the help. :bounce:
     
  10. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 24,177   +19

    Well done, your HJT log is clean.

    If you have any further virus/spyware problems, please post in this thread.

    Regards Howard :)

    This thread is for the use of Korokoku only. Please don`t post your own virus/spyware problems in this thread. Instead, open a new thread in our security and the web forum.
     
Topic Status:
Not open for further replies.

Similar Topics

Add New Comment

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...