Hi guys,

In the past 24 hrs I've browsed through probably half the internet looking up stuff on BSODs, because I've had about 20 of them in the past days.

The problem:
Out of blue, w/o anything installed or updated, I started getting BSODs with the same errors time and again:

BCCode : 77 BCP1 : C000003C BCP2 : C000003C BCP3 : 00000000
BCP4 : 022DA000 OSVer : 5_1_2600 SP : 2_0 Product : 256_1

BCCode : f4 BCP1 : 00000003 BCP2 : 86587460 BCP3 : 865875D4
BCP4 : 805C7496 OSVer : 5_1_2600 SP : 2_0 Product : 256_1

BCCode : f4 BCP1 : 00000003 BCP2 : 86693DA0 BCP3 : 86693F14
BCP4 : 805C7496 OSVer : 5_1_2600 SP : 2_0 Product : 256_1

etc

Overall, the most mistakes I had were KERNEL_DATA_INPAGE_ERROR and KERNEL_STACK_INPAGE_ERROR

Mostly BCCode f4 with periodic 77's.

Done everything: defragged twice, ran chkdsk /r /f, did system restore to a point from 5 days ago, killed pagefile and then restored it back, ran memtest (not 5 times though, only once -- but it was clean), updated bios, updated drivers just in case... NOTHING WORKED!!

I did the minidump unpacking and here's what it said (attached).

Any advice would be greatly appreciated, though, frankly, I almost gave up and am totally out of any ideas whatsoever.

Thanks!!

Oh, and the system specs are:


Product: ThinkPad T43 2668-WY7
Operating system: WinXP SP2

Centrino 760(2.0GHz), 1GB RAM, 60GB HD, 14.1in 1400x1050 LCD, 64MB ATI Radeon X300, CDRW/DVDRW, Intel 802.11bg wireless(MPCI), Bluetooth/Modem(CDC), 1Gb Ethernet(LOM), UltraNav, Secure Chip, Fingerprint reader, 6c Li-Ion batt, WinXP Pro

---

Any ideas would be greatly appreciated.

Do you have any spare RAM, because it may still be your memory, memtest doesn't always find faults. Use this as a last resort though if you dont have any spare RAM.

Guys,

same BIZZARE issue here as well (thank god it is not just me). New RAM does not help the situation either and the lappy only goes BSOD when the wireless (internal INTEL Pro 2100) is active?! But here's the wierd thing:

Only BS's on the public network (UNI) and not at home?!! WTF? Man, effing stumped on this one...

Details: Error Signature

BCCode: 100000d1 BCP1: 0201043D BCP2: 00000002 BCP3: 00000001
BCP4: F767DF0F OSVer: 5_1_2600 SP: 2_0 Product: 256_1

Error Report Contents

C:\DOCUME~1\xyz\LOCALS~1\Temp\WERd5d2.dir00\Mini012207-01.dmp
C:\DOCUME~1\xyz\LOCALS~1\Temp\WERd5d2.dir00\sysdata.xml

So, guru's out there, please help. Thanks and love the site.

JT

BenQ Joybook 6000N 1.6 Centrino yada,yada...

Hi Mozgoved,

This is hardware error of your hard disk. Run chkdsk /r and re-allocate the paging space.


CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 00000003, Process
Arg2: 86587460, Terminating object
Arg3: 865875d4, Process image file name
Arg4: 805c7496, Explanatory message (ascii)

Debugging Details:
------------------


PROCESS_OBJECT: 86587460

IMAGE_NAME: csrss.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 0

MODULE_NAME: csrss

FAULTING_MODULE: 00000000

PROCESS_NAME: csrss.exe

EXCEPTION_RECORD: b87099d8 -- (.exr ffffffffb87099d8)
.exr ffffffffb87099d8
ExceptionAddress: 75b7b129
ExceptionCode: c0000006 (In-page I/O error) <--- paging space I/O error
ExceptionFlags: 00000000
NumberParameters: 3
Parameter[0]: 00000000
Parameter[1]: 75b7b129
Parameter[2]: c000003c
Inpage operation failed at 75b7b129, due to I/O error c000003c

EXCEPTION_CODE: (NTSTATUS) 0xc000003c - {Data Overrun} A data overrun error occurred.

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: DRIVER_FAULT

ERROR_CODE: (NTSTATUS) 0xc0000006 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The required data was not placed into memory because of an I/O error status of "0x%08lx".

IO_ERROR: (NTSTATUS) 0xc000003c - {Data Overrun} A data overrun error occurred.

EXCEPTION_STR: 0xc0000006_c000003c

FAULTING_IP:
+75b7b129
75b7b129 ?? ???

BUGCHECK_STR: 0xF4_IOERR_C000003C

STACK_TEXT:
b8709520 805c65c7 000000f4 00000003 86587460 nt!KeBugCheckEx+0x1b
b8709544 805c7541 805c7496 86587460 865875d4 nt!PspCatchCriticalBreak+0x75
b8709574 8053c818 865876a8 c0000006 b87099b0 nt!NtTerminateProcess+0x7d
b8709574 804fe6ad 865876a8 c0000006 b87099b0 nt!KiFastCallEntry+0xf8
b87095f4 804fc976 ffffffff c0000006 b87099f8 nt!ZwTerminateProcess+0x11
b87099b0 804ff901 b87099d8 00000000 b8709d64 nt!KiDispatchException+0x3a0
b8709d34 80540059 00e0fbe8 00e0fc08 00000000 nt!KiRaiseException+0x175
b8709d50 8053c818 00e0fbe8 00e0fc08 00000000 nt!NtRaiseException+0x31
b8709d50 75b7b129 00e0fbe8 00e0fc08 00000000 nt!KiFastCallEntry+0xf8
WARNING: Frame IP not in any known module. Following frames may be wrong.
00e0fff4 00000000 00000000 00000000 00000000 0x75b7b129


STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

FAILURE_BUCKET_ID: 0xF4_IOERR_C000003C_IMAGE_csrss.exe

BUCKET_ID: 0xF4_IOERR_C000003C_IMAGE_csrss.exe

Followup: MachineOwner
---------

Download and run Memtest86 and see if it reports any errors.

Thank you for your help guys. Memtest is sweet with no issues with both sticks. Would this be a good description of reallocation of paging space before I go ahead?

http://www.unet.univie.ac.at/aix/aixbman/baseadmn/pag_space_resiz.htm#A9D74E8C638benw

Thanks again for your input.

JT

PS. Can I reallocate with Partion Magic?

Hi Nevastra,

My previous post is not related to your problem. You should open a new post for your problem in order to avoid confusion. BTW you don't attach the minidump and it is the most useful diagnostic information.