TechSpot

System alert security fake pop ups

By natet09
Nov 19, 2007
  1. I have run all of the tests prescribed but am unsure what to do at this point. I appreaciate any help in advance
     
  2. Rik

    Rik Banned Posts: 3,814

    Doc files can carry infections, you need to remove them immediately.

    You need to have a read of this - If your system is infected. Read this before deciding whether to CLEAN or REFORMAT.

    Then if you should wish to proceed with cleaning your system you need to go and read the Viruses/Spyware/Malware, preliminary removal instructions. Follow all the instructions exactly.

    Post fresh HJT, Combofix, and AVG Antispyware logs as ATTACHMENTS into this thread, only after doing the above.
    We also need to know the result of Panda Antirootkit.


    This thread is for the use of natet09 only. Please don`t post your own virus/spyware problems in this thread. Instead, open a new thread in our security and the web forum.
     
  3. natet09

    natet09 TS Rookie Topic Starter

    i did complete the steps in the spyware/malware removal guide. here are the appropriate logs. the pandaantiroot kit came up with nothing.
     
  4. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 24,177   +19

    Hello and welcome to Techspot.

    Your system is riddled with malware and it`s going to take a while in order to get it clean.

    Right click on this link DelO15Domains.inf and choose Save As. Save it to your desktop. Right click on that file and choose Install. It will run immediately (you won't be able to see anything happen). You may delete it afterwards. NOTE: This script will delete any sites you may have added to the Trusted Sites. So if you want them back, you have to add them back to the Trusted Sites again.


    Go to add remove programmes in your control panel and uninstall anything to do with(if there).

    Viewpoint
    viewpoint toolbar
    viewpoint manager
    WeatherBug
    Bodog Poker
    Poker.com

    Close control panel.

    Click start/run and type services.msc into the run box and press the enter key.

    When the window appears, maximise it. Double click on the following services(if there) and select stop if they are running. Set the startup type to disabled. Click apply/ok for each service you disable.

    Viewpoint Manager Service

    Close the services window.

    Open notepad and copy/paste the text in the code box below into it:
    NOTE* make sure to only highlight and copy what is inside the quote box nothing out side of it.
    Also ..

    Pay particular attention to this :-

    Make sure the word File:: is on the first line of the text file you save (no blank line above it, & no space in front of it)
    Code:



    Save this as CFScript.txt

    Then drag the CFScript.txt into ComboFix.exe as you see in the screenshot below.

    [​IMG]


    This will start ComboFix again. After reboot, (in case it asks to reboot), post the contents of Combofix.txt in your next reply together with a fresh HJT log.

    Please open notepad and and copy and paste next bold in it:
    (don't forget to copy and paste REGEDIT4)

    Save this as "fix.reg" Choose to save as *all files and place it on your desktop.

    Doubleclick on it and when it asks you if you want to merge the contents to the registry, click yes/ok.

    Regards Howard :wave: :wave:

    This thread is for the use of natet09 only. Please don`t post your own virus/spyware problems in this thread. Instead, open a new thread in our security and the web forum.
     
  5. natet09

    natet09 TS Rookie Topic Starter

    I am getting the combo fix error message saying it is out of date and uninstalls, is there any way around this. thanks again

    also do i need to wait and fix combo fix before i can do the registry edit step. thanks again
     
  6. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 24,177   +19

    Combofix is having major problems at the moment. In the meantime, please do the following.

    1. Please download The Avenger by Swandog46 from HERE. Save it to your Desktop and extract it.

    2. Download the attached avengerscript.txt and save it to your desktop

    Note: the above code was created specifically for this user. If you are not this user, do NOT follow these directions as they could damage the workings of your system.

    3. Now, start The Avenger program by double clicking on its icon on your desktop.

    Under "Script file to execute" choose "Load script from file".
    Now click on the folder icon which will open a new window titled "open Script File"
    navigate to the file you have just downloaded, click on it and press open
    Now click on the Green Light to begin execution of the script
    Answer "Yes" twice when prompted.

    4. The Avenger will automatically do the following:

    It will Restart your computer. ( In cases where the code to execute contains "Drivers to Unload", The Avenger will actually restart your system twice.)
    On reboot, it will briefly open a black command window on your desktop, this is normal.
    After the restart, it creates a log file that should open with the results of Avenger’s actions. This log file will be located at C:\avenger.txt
    The Avenger will also have backed up all the files, etc., that you asked it to delete, and will have zipped them and moved the zip archives to C:\avenger\backup.zip.

    5. Please attach the content of c:\avenger.txt into your reply.

    Please download Deckard's System Scanner (DSS) and save it to your Desktop.
    DISCONNECT FROM THE INTERNET...REMOVE THE PLUG FROM THE BACK OF THE COMPUTER

    Close all other windows before proceeding.

    This means TURN OFF ALL other security programmes.
    Norton Anti-virus, AVG Anti-spyware or any other security programmes you`re running.

    Double-click on dss.exe and follow the prompts.
    When it has finished, dss will open two Notepads main.txt and extra.txt -- please attach the main.txt and extra.txt in your next reply.

    Re-enable your security programmes and reconnect to the net.

    Regards Howard :)

    This thread is for the use of natet09 only. Please don`t post your own virus/spyware problems in this thread. Instead, open a new thread in our security and the web forum.
     
  7. natet09

    natet09 TS Rookie Topic Starter

    unfortunatly, avenger is not letting me run the script you have provided. the error message, "syntax error in line --- does not appear to be a valid registry path. line will be ignored. then i have the option to continue or cancel. continuing keeps me in the loop of the original error message and aborting provides me with an error log.

    error is
    Syntax error in line --- does not appear to be a valid registry path. Line will be ignored.
    Error code: 0
    Line: {11A69AE4-FBED-4832-A2BF-45AF82825583}"=-
     
  8. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 24,177   +19

    I have replaced the Avenger script in my post above. Please try and run that.

    Regards Howard :)

    This thread is for the use of natet09 only. Please don`t post your own virus/spyware problems in this thread. Instead, open a new thread in our security and the web forum.
     
  9. natet09

    natet09 TS Rookie Topic Starter

    there were still some problems with avenger but it ran. so did the dss. im surely not finished but a significant improvement in the system is already evident. logs are included, thanks again
     
  10. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 24,177   +19

    You might want to copy and paste these instructions into a notepad file. Then you can have the file open in safe mode, so you can follow the instructions easier.

    Boot into safe mode, under your normal user name(NOT THE ADMINISTRATOR ACCOUNT). See how HERE.

    In Windows Explorer, turn on "Show all files and folders, including hidden and system". See how HERE.

    Run HJT with no other programmes open(except notepad). Click the scan button. Have HJT fix the following, by placing a tick in the little box next to(if there).

    O2 - BHO: (no name) - {13944551-3731-40ED-859E-D9C155E7E81E} - C:\WINDOWS\system32\ursts.dll (file missing)

    O2 - BHO: (no name) - {4CB8F4B4-5F66-4D9E-BC3B-184596A58824} - C:\WINDOWS\system32\efcdebc.dll (file missing)

    O2 - BHO: (no name) - {7C2D5A4E-CC31-4F02-87E2-4871123786D8} - C:\WINDOWS\system32\awtrq.dll (file missing)

    O2 - BHO: {4ff60e8e-fc51-639b-ce34-ea6b3d5026f7} - {7f6205d3-b6ae-43ec-b936-15cfe8e06ff4} - C:\WINDOWS\system32\jchxdxjw.dll (file missing)

    O2 - BHO: (no name) - {A95B2816-1D7E-4561-A202-68C0DE02353A} - C:\WINDOWS\system32\tiepqjee.dll (file missing)

    O3 - Toolbar: Security Toolbar - {11A69AE4-FBED-4832-A2BF-45AF82825583} - C:\WINDOWS\system32\tiepqjee.dll (file missing)

    O4 - HKLM\..\Run: [60697953] rundll32.exe "C:\WINDOWS\system32\qeqgnyof.dll",b

    O9 - Extra button: Bodog Poker - {F47C1DB5-ED21-4dc1-853E-D1495792D4C5} - C:\Program Files\Bodog Poker\BPGame.exe (file missing)

    O9 - Extra button: Poker.com - {6FDD5236-C9F0-49ef-935D-385F5E21991A} - C:\Program Files\Poker.com\Poker.exe (file missing) (HKCU)

    O16 - DPF: {21C6245C-9408-11D7-BF3B-00E09876DF26} (WebTrain.ctlWebTrain) - http://www.webtrain.com/cabinet/wt0809.cab

    Click on the fix checked button.

    Close HJT.

    Locate and delete the following bold files and/or folders(if there).

    C:\WINDOWS\system32\qeqgnyof.dll
    C:\WINDOWS\system32\qrtwa.ini2

    Click start/run and type regedit into the run box and hit the enter key.

    Navigate to the following regkeys and delete the bold portions(if there).

    HKEY_LOCAL_MACHINE\~\Browser Helper Objects\{13944551-3731-40ED-859E-D9C155E7E81E}

    HKEY_LOCAL_MACHINE\~\Browser Helper Objects\{4CB8F4B4-5F66-4D9E-BC3B-184596A58824}

    HKEY_LOCAL_MACHINE\~\Browser Helper Objects\{7C2D5A4E-CC31-4F02-87E2-4871123786D8}

    HKEY_LOCAL_MACHINE\~\Browser Helper Objects\{7f6205d3-b6ae-43ec-b936-15cfe8e06ff4}

    HKEY_LOCAL_MACHINE\~\Browser Helper Objects\{A95B2816-1D7E-4561-A202-68C0DE02353A}

    HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Toolbar\WebBrowser\{11A69AE4-FBED-4832-A2BF-45AF82825583}

    HKEY_CLASSES_ROOT\CLSID\{11A69AE4-FBED-4832-A2BF-45AF82825583}

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\60697953

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\ShellExecuteHooks\{4CB8F4B4-5F66-4D9E-BC3B-184596A58824}

    Close regedit.

    Reboot into normal mode and rehide your protected OS files.

    Please open notepad and and copy and paste next bold in it:
    (don't forget to copy and paste REGEDIT4)

    Save this as "fix.reg" Choose to save as *all files and place it on your desktop.

    Doubleclick on it and when it asks you if you want to merge the contents to the registry, click yes/ok.

    Please post a fresh main.txt and let me know if you`re still having any problems.

    Regards Howard :)

    This thread is for the use of natet09 only. Please don`t post your own virus/spyware problems in this thread. Instead, open a new thread in our security and the web forum.
     
Topic Status:
Not open for further replies.

Similar Topics

Add New Comment

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...