TechSpot

The instructions at "0x00402423" referenced memory at "0x000000074". The memory could

By Alexc3216
Nov 8, 2007
  1. The instructions at "0x00402423" referenced memory at "0x000000074". The memory could not be "read".

    I am receiving this error when I run nightly batches. a simple reboot makes the error go away but periodically the error will return.

    I am running MS 2000 Server w/SP4. I dont believe this to be a memory issue.

    Any suggestions would be helpful.

    Alex
     
  2. Rik

    Rik Banned Posts: 3,814

    Google and get memtest and run it for atleast 7 passes, any errors and you need to replce your ram.
     
  3. Alexc3216

    Alexc3216 TS Rookie Topic Starter

    I have over 100G of free space I cant believe it is a memory issue... any other suggestions?
     
  4. Rik

    Rik Banned Posts: 3,814

    Hard drive space has absolutely nothing whatsoever to do with possibly faulty ram. Hard drives and ram are 2 entirely different things. Google both if you don't believe me.

    You have asked for help, i have offered some!
     
  5. Alexc3216

    Alexc3216 TS Rookie Topic Starter

    thank you so much for your input.
    I was misunderstood before.

    what I am going to do is call dell to run the memory test because I am receiving this error on one of my servers.

    I will keep you posted on the memory test.

    thanks again,.
     
  6. Rik

    Rik Banned Posts: 3,814

    Cool, the symptoms you described are classic ram fault ones.
     
  7. Alexc3216

    Alexc3216 TS Rookie Topic Starter

    Dell ran memory test and all was good.
    any other ideas?
     
  8. Rik

    Rik Banned Posts: 3,814

    What test(s) did they run?
     
  9. Alexc3216

    Alexc3216 TS Rookie Topic Starter

    I am running a Power edge 2800
    so they ran a Power Edge Diagnostic 2.9
     
  10. Alexc3216

    Alexc3216 TS Rookie Topic Starter

    checked everything but network cards because the server is live.
    all came back with no errors.
    Specifically the system memory - the test operation completed successfully. No errors
     
Topic Status:
Not open for further replies.

Similar Topics

Add New Comment

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...