There is 3 different BSOD's i get and i don't know what else to do!!!

By Diablo
Dec 14, 2005
Topic Status:
Not open for further replies.
  1. It started from resets without any reason (new computer, all updated)
    when i started to solve the problem i checked the what are the stops and events and treied to solve it, but when i solve first stop i get second
    and when second solve i get the third and solve it i get the first one again.
    The BSODs are: 0x00000050
    0x000000c4
    0x000000d1
    I have no idea what to do :hotbounce !!!
    please help.

    I tryed to check with SiSoftware but i didn'found any serios problems, but in some cases i got BSOD 0x000000c4, when i tryed to run hardware check and then i solve it with verifier.

    P.S.
    The computer working slow resently, for example it takes a few seconds to open "My Computer".


    The computer is:
    CPU Intel(r) intel(R) 4 CPU 3.20GHz
    M/B Asus P5GD1
    VGA Card Asus Extreme AX600 Pro
    HDD WDC WD800JB-00FMA0 (74GB)
    CD-ROM NECDVD_RW ND-3520A
    OS Windows XP SP2

    the most "popular" events are:

    Event Type: Warning
    Event Source: Tcpip
    Event Category: None
    Event ID: 4226
    Date: 11/14/2005
    Time: 2:15:01 PM
    User: N/A
    Computer: GOLDENBERG
    Description:
    TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 00 00 00 00 01 00 54 00 ......T.
    0008: 00 00 00 00 82 10 00 80 ....‚..€
    0010: 01 00 00 00 00 00 00 00 ........
    0018: 00 00 00 00 00 00 00 00 ........
    0020: 00 00 00 00 00 00 00 00 ........




    Event Type: Error
    Event Source: System Error
    Event Category: (102)
    Event ID: 1003
    Date: 11/14/2005
    Time: 4:31:00 PM
    User: N/A
    Computer: GOLDENBERG
    Description:
    Error code 000000c4, parameter1 00000085, parameter2 8196a330, parameter3 00000020, parameter4 000000e0.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 53 79 73 74 65 6d 20 45 System E
    0008: 72 72 6f 72 20 20 45 72 rror Er
    0010: 72 6f 72 20 63 6f 64 65 ror code
    0018: 20 30 30 30 30 30 30 63 000000c
    0020: 34 20 20 50 61 72 61 6d 4 Param
    0028: 65 74 65 72 73 20 30 30 eters 00
    0030: 30 30 30 30 38 35 2c 20 000085,
    0038: 38 31 39 36 61 33 33 30 8196a330
    0040: 2c 20 30 30 30 30 30 30 , 000000
    0048: 32 30 2c 20 30 30 30 30 20, 0000
    0050: 30 30 65 30 00e0



    Event Type: Error
    Event Source: System Error
    Event Category: (102)
    Event ID: 1003
    Date: 11/14/2005
    Time: 9:01:56 AM
    User: N/A
    Computer: GOLDENBERG
    Description:
    Error code 100000d1, parameter1 00000003, parameter2 00000002, parameter3 00000000, parameter4 f4b83907.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 53 79 73 74 65 6d 20 45 System E
    0008: 72 72 6f 72 20 20 45 72 rror Er
    0010: 72 6f 72 20 63 6f 64 65 ror code
    0018: 20 31 30 30 30 30 30 64 100000d
    0020: 31 20 20 50 61 72 61 6d 1 Param
    0028: 65 74 65 72 73 20 30 30 eters 00
    0030: 30 30 30 30 30 33 2c 20 000003,
    0038: 30 30 30 30 30 30 30 32 00000002
    0040: 2c 20 30 30 30 30 30 30 , 000000
    0048: 30 30 2c 20 66 34 62 38 00, f4b8
    0050: 33 39 30 37 3907



    Event Type: Error
    Event Source: Application Error
    Event Category: None
    Event ID: 1000
    Date: 11/14/2005
    Time: 4:16:15 PM
    User: N/A
    Computer: GOLDENBERG
    Description:
    Faulting application overclk.exe, version 0.0.0.0, faulting module unknown, version 0.0.0.0, fault address 0x019e1530.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 41 70 70 6c 69 63 61 74 Applicat
    0008: 69 6f 6e 20 46 61 69 6c ion Fail
    0010: 75 72 65 20 20 6f 76 65 ure ove
    0018: 72 63 6c 6b 2e 65 78 65 rclk.exe
    0020: 20 30 2e 30 2e 30 2e 30 0.0.0.0
    0028: 20 69 6e 20 75 6e 6b 6e in unkn
    0030: 6f 77 6e 20 30 2e 30 2e own 0.0.
    0038: 30 2e 30 20 61 74 20 6f 0.0 at o
    0040: 66 66 73 65 74 20 30 31 ffset 01
    0048: 39 65 31 35 33 30 0d 0a 9e1530..


    Is there any posibility thet E-Mule some how involved?
    I got this idea becouse of event 4226, yet, not every reset emule was on.

    PLEASE HELP!!!
  2. kenyee

    kenyee Newcomer, in training Posts: 32

    The last item says you're running overclk.exe. Are you overclocking? If so, reset the BIOS back to defaults...one of your pieces of hardware (old caps might do this) may have worn down so it doesn't like the overclock any more...
  3. Diablo

    Diablo Newcomer, in training Topic Starter

    The overclocking.exe is an ASUS program which runs in startup and gives you the information about fan speed tempr. and so on. So probably this isn't it.
    About the parts: all the parts are new(5 month old max.) except the HDD.
  4. kenyee

    kenyee Newcomer, in training Posts: 32

    Sounds like you think your hardware is good, so the only other thing to try is create a new partition and install Windows or Linux onto that and see if it still BSODs.

    If it does, then you have a hardware issue and you should start swapping w/ other known good parts one by one.
    If it doesn't, then you've got some weird driver issue in Window, so you'll have to install the driver one by one.

    Yep...painful. That's why it's easier nowadays to just get a new system and copy all your data to it and feed the landfills :)
  5. cpc2004

    cpc2004 Newcomer, in training Posts: 2,044

    Hi diablo,

    I believe that your windows have two culprits. Anti-Virus Mini-Firewall and Sandra. Upgrade Anti-Virus Mini-Firewall and Sandra.


    Mini111205-03.dmp BugCheck C4, {85, 81acc440, 20, e0}
    Owning Process 81b8e650 Image: RpcSandraSrv.ex
    Probably caused by : Sandra.sys ( Sandra+1a76 )

    Mini111205-04.dmp BugCheck 100000D1, {3, 2, 0, f8631907}
    Probably caused by : mvstdi5x.sys ( mvstdi5x+2907 )
  6. Diablo

    Diablo Newcomer, in training Topic Starter

    About Anti-Virus Mini-Firewall - it's McAfee, and i updated it with hope that it'll help.
    About Sandra, it happend when i tryed to run hardware test by SiSoftware and i solve it by vrifier.exe.
    But what about event 4226? How can i change the limmits on tcp/ip?
    And what about my computer working slow (as i said in the thread opening)?
    by all the tests ituses about 50% of total memory on all proccesses.
    thank for answears
  7. howard_hopkinso

    howard_hopkinso Newcomer, in training Posts: 25,948   +19

  8. Diablo

    Diablo Newcomer, in training Topic Starter

    It doesn't want to stop...

    As sajested i updated the drivers but it's still gives me the error about mvstdi5x.sys that is probably part of McAfee. I downloaded WinDBG and opened recent minidumps, i don't understeand in this but it looks like TCP/IP problems are related to the mvstdi5x.sys problem.
    Recent dumps are attached.

    P.S.
    in the last 2 days i sometimes get an error messege while starting the computer: "The overclocking faild F1 to enter the Setup (Bios) F2 to continue with defult settings"
    When i enter the setup, on JumperFree configuration, the CPU config. is set on "Auto" and no overclocking. What can it be and maybe it all connected together?
  9. Diablo

    Diablo Newcomer, in training Topic Starter

    Can you tell me something abou the TCP/IP problem?
  10. howard_hopkinso

    howard_hopkinso Newcomer, in training Posts: 25,948   +19

    All your latest minidumps are crashing at mvstdi5x.sys.

    Remove the programme, and try the alternatives I suggested.

    Regards Howard :)
  11. djtech9

    djtech9 Newcomer, in training

    hey diablo,

    can you please tell me the specs on your power supply.?

    i am using:
    Power Focus, microATX 300W

    DC output:
    +5V 20A
    +12V 10A
    +3.3V 12A

    i receive the same random crashes as you, and might think it is a unstable power supply issue. i have yet to test my system with a new supply, but i was wondering if you could post your power supply specs for me.

    thanks
     
  12. kenyee

    kenyee Newcomer, in training Posts: 32

    microATX power supplies are notorious for being underpowered unless you're running a truly barebones system. What else are you running on that power supply? (motherboard, cards, overclocking?)
  13. djtech9

    djtech9 Newcomer, in training

    hey,

    im running :

    -300W powersupply
    -Motherboard model#pm9msr2 (machspeed)
    -3.06 GHz intel celeron D processor
    -40Gb Western Digital harddrive
    -512Mb Kingston Memory
    -128Mb Asus V9520 AGP videocard (GeForce 5200)


    software components:

    -windows xp sp1

    basically im testing these systems inside kiosks.
    these systems are therefore running non-stop. mostly playing video files through the media player.

    could it be a heat issue causing random crashes?
    thanks
  14. Diablo

    Diablo Newcomer, in training Topic Starter

    To djtech9:

    I haven't yet checked my PSU, and it's still an option.
    Now i'm checking if the drivers i installed for my video card was right.
    I installed the drivers from the disk i got with the card (EAX600 Pro by ASUS)
    but there is a posibility that thay are not good for this updates (of XP) so i downloaded the lattest drivers from ATI site, and we'll see.
Topic Status:
Not open for further replies.


Add New Comment

TechSpot Members
Login or sign up for free,
it takes about 30 seconds.
You may also...


Get complete access to the TechSpot community. Join thousands of technology enthusiasts that contribute and share knowledge in our forum. Get a private inbox, upload your own photo gallery and more.