ASRock X58 SuperComputer SATA RAID Driver 1.19
SATA RAID Driver for system to read from floppy diskette during Windows installation.
SATA RAID Driver Installation Guide
SATA RAID Driver is for users who plan to install Windows OS on SATA / SATAII HDDs with RAID functions. To use RAID functions, you need to make a SATA RAID Driver floppy diskette before you install the operation system, such as Windows XP. If you do not plan to use RAID functions, it is not necessary to make a SATA RAID Driver floppy diskette. Please follow below steps for the usage of SATA RAID Driver:
1. Copy the SATA RAID Driver from our website to your SATA HDDs. Unzip it, and copy all the files and folders to an empty diskette.
2. Make sure that the “SATA Operation Mode” option in BIOS setup is set to RAID mode.
3. Install Windows OS to your system. At the beginning of Windows setup, please press F6 and insert the SATA RAID Driver floppy diskette you just made. Then you are allowed to select the required driver to install after your system reading the SATA RAID Driver floppy diskette.
4. After Windows OS installation, use the RAID tool in our support CD to configure RAID arrays under BIOS or Windows environment.
For the details of RAID operation procedures, please refer to our user manual in the support CD or quick installation guide for further information.
Windows XP 64-bit
Windows Vista 64-bit
Note: Before proceeding with your driver installation we suggest you make sure you are installing the latest version available and for the appropriate model/revision and Operating System. We strongly suggest following 'readme' instructions for installing drivers when available. Often restarting your system will be necessary for the new driver to become active and start functioning properly.
Downloads and Drivers
Subscribe to TechSpot
Get free exclusive content, learn about new features and breaking tech news.