Cisco Linksys E900 Firmware 1.0.04

Manufacturer:
Date: November 5, 2012
File Size: 6.8 MB
OS Support: Windows (all)
Downloads: 8,186

Alternate mirrors

Report a bad link

Release notes:

Wireless-N300 Router (E900)

Features:

  • Wireless-N (2.4 GHz)
  • Fast Ethernet (10/100 Mbps) 4-port switch
  • High speed up to 300 Mbps
  • IPv4 / IPv6 dual stack support

Important:

  • The safest way to perform the firmware upgrade is to use a wired computer via web UI or Cisco Connect Setup tool.
  • DO NOT power cycle the Router during the firmware upgrade process.

What's New:

  • Added control to the browser-based GUI, so that a user can manually enable/disable Wi-Fi Protected Setup.
  • Added control to the browser-based GUI, so that a user can manually enable/disable Wi-Fi Protected Setup.
  • Resolved interoperability issue with ISP DHCP server that mandates client identifier option (option 61).
  • Resolved issue with sending broadcast DHCP renewal message. The correct behavior is sending unicast message.
  • Allow value of 255 in the 4th octet of L2TP server IP address.

Note: Before proceeding with your driver installation we suggest you make sure you are installing the latest version available and for the appropriate model/revision and Operating System. We strongly suggest following 'readme' instructions for installing drivers when available. Often restarting your system will be necessary for the new driver to become active and start functioning properly.

You can check back regularly for the latest updates at TechSpot's Drivers section or stop by our homepage for the best daily coverage of PC technology news on the Web.

TechSpot on:

Subscribe to TechSpot

Receive a weekly update of our best features and tech news you don't want to miss: