What's new:

  • Fix special character strings may cause SSID list to be empty
  • Auto language selection is now set by default
  • Translation fixes
  • Web UI fixes

Updating the firmware on your My Net AC Bridge

These instructions represent a manual update.

IMPORTANT: Do not interrupt the firmware upgrade process. Doing so may cause the device to malfunction or unable to boot. If you are using the manual update method, do not rename the firmware file. Doing so will cause the manual update to fail and can corrupt the system.

  1. Download the firmware to your desktop
  2. Unzip the file and save it to your desktop.
  3. Open a web browser and type in http://myACbridge or http://myACbridge.local (Mac) to get to the login screen of your bridge.
  4. Enter your username and password and click the Login button at the main login screen if you have secured your device previously with a password. The default username is admin, and the default password is password.
  5. From the main dashboard screen, click Advanced Settings.
  6. Click Admin, under the Firmware Update tab.
  7. Click the Choose File button.
  8. Browse to the location where you saved the firmware file and select it.
  9. Click Upload button and then click the Ok button to proceed with the firmware update. Once the process is complete, the device will reboot. This process will take a few minutes.
Alternative drivers to Western Digital WD My Net AC Bridge Firmware 1.02.01: