The R319 drivers are the fifth ‘Optimal Drivers for Enterprise’, a
release dedicated to relatively long term stability for ISV
certification, OEMs, and Enterprise customers.
NVIDIA Control Panel
Display Category - Set up Multiple Displays Page Lock Clone
Region control - new control lets you specify a section of a "pan
and scan clone" source display to be cloned and locked. Once locked,
you cannot dynamically pan the area. Lock Clone Region is available
only with NVIDIA Quadro 2000(D) and later products (including
corresponding K-series). Unlike pan and scan clone mode, the Lock
Clone Region feature is not supported on Quadro 600/K600 or NVS
Pan and Scan Clone were introduced in R300 drivers. It is
similar to regular Clone mode except that the two displays are
different resolutions. The display with the larger resolution is the
source clone display. The display with the smaller resolution shows
a cropped section of the cloned source display. Pan and Scan Clone
is available only with NVIDIA Quadro 600 and later products
(including corresponding K series), NVS 310 and later NVS products,
and Windows 7 and later Windows operating systems.
NVIDIA Control Panel -> Workstation Category -> Set Up Mosaic Page
--Control Display - You can now set up a control display that is
separate from the Mosaic configuration
Multiple Mosaic Groups
Provides multiple Mosaic/Premium Mosaic topologies to be active
on a single system. Configurable using the ConfigureMosaic tool.
GPUDirect for Video - improved GPUDirect for Video performance
on Premium Mosaic configurations.
New NVIEW version - 140.75
NvWMI is a WMI-based interface for configuring enterprise systems.
Added support for Quadro Sync.
Added support for GPU Power Management --Added method to query the
serial number of a board
Added APIs to configure sync delay (skew and start delay) in lines
Workstation application compatibility fixes. Please read the release
notes for more information on product support, feature limitations, driver
fixes and known compatibility issues.
If you would like to be notified of upcoming drivers for Windows, please
Support for CUDA 5.5
Support for OpenGL 4.3
Support for the Open Computing Language (OpenCL) 1.1 in Quadro FX Series
x700 and newer as well as the FX4600 and FX5600
Support for DirectX11
K6000, K600, K5000, K4000, K2000D, K2000, FX 5800, FX 580, FX 570,
FX 5600, FX 4800, FX 4700 X2, FX 4600, FX 380 Low Profile, FX 3800, FX
380, FX 370 Low Profile, FX 3700, FX 370, FX 3450, FX 1800, FX 1700, CX,
6000, 600, 5000, 410, 4000, 400, 2000D, 2000