Asrock IMB-142 Series Bios 1.10

Manufacturer:
Date: September 27, 2013
File Size: 1.2 MB
OS Support: Windows (all)
Downloads: 214

Alternate mirrors

Report a bad link

Release notes:

Features:

  • Intel® Dual-Core Atom™ CedarViewProcessor D2550/N2600/N2800
  • Intel® NM10 Express Chipset
  • Integrated Intel® PowerVR SGX545, DirectX 9.0, Pixel Shader 3.0
  • Supports DDR3 1066MHz, 2 x SO-DIMM, up to 4GB system memory
  • 1 x HDMI, 1 x DVI-D, 1 x Single Channel 18-bit LVDS
  • 8 x USB 2.0, 2 x SATA2
  • 1 x PCI, 1 x mini-PCIe
  • Gigabit LAN : 2 x Intel® WG82574L

What's New:

  • Update CLK Gen code

How to update the BIOS?

There are 2 methods for updating the BIOS using Instant Flash.

Method 1:

  1. Save the BIOS files on a device such as USB disk (FAT32 format), hard disk (FAT32 format) and floppy drive.
  2. Press during POST to get into BIOS setup menu.
  3. Select the utility under [Smart] menu to execute it.
  4. ASRock Instant Flash will automatically detect all devices and only list those BIOS versions which are suitable for your motherboard.
  5. Select the suitable BIOS version and flash.

Method 2:

  1. Save the BIOS files on a device such as USB disk (FAT32 format), hard disk (FAT32 format) and floppy drive.
  2. Press when you see this (or similar) page.
  3. Select the suitable BIOS version and flash.

Notice: If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.

Note: Before proceeding with your driver installation we suggest you make sure you are installing the latest version available and for the appropriate model/revision and Operating System. We strongly suggest following 'readme' instructions for installing drivers when available. Often restarting your system will be necessary for the new driver to become active and start functioning properly.

You can check back regularly for the latest updates at TechSpot's Drivers section or stop by our homepage for the best daily coverage of PC technology news on the Web.

TechSpot on:

Subscribe to TechSpot

Receive a weekly update of our best features and tech news you don't want to miss: