HP OfficeJet G95 Windows 2K Web Package Driver Version 3.10:

This driver supports all Officejet G series products connected thru USB and parallel ports or on the network using a HP Jetdirect box.

This driver replaces previous versions of the HP OfficeJet G Series drivers as defined below:

* For Windows 2K customers this driver replaces driver Versions 2.50 or 2.43 or earlier.

Notice: If you intend to use both a HP OfficeJet K Series and HP OfficeJet G Series All-In-One device on the same PC, there is an uncommon scenario where the OfficeJet G Series will not work. All three of the following conditions must be met in order to experience this situation:

* Your OfficeJet K Series has Firmware Version 4.04.
* Your OfficeJet K Series is installed on the Parallel Port.
* You intend to install an OfficeJet G Series device either on this same computer using a second Parallel Port or on the same Parallel Port at a later time.

If you have not met ALL of these conditions, then you will NOT experience this problem and may proceed. If you expect to encounter all these conditions in the future then do not install this driver. If you are unsure, then contact HP support for further direction.

Follow these steps to determine your HP Officejet K Series device's firmware version:

* Simultaneously press and hold the [ENTER] and [Cancel] buttons (this will take two hands for most people)
* Release both buttons at the same time
* Wait for the "Extended Self-Test Report" to print out.
* Look at the "Firmware Version" in the lower third of the page, the left hand column, about the sixth item down. Your device has firmware 4.04 if you see the "Firmware Version: OD404R" on the printout.

OfficeJet G Series Driver Version 3.10 Installation Instructions for Direct USB or parallel port connections follow:

1. Download the web package driver file.
2. Turn off the HP OfficeJet G Series device and disconnect either the USB cable or Parallel port cable.
3. Temporarily disable antivirus software.
4. Exit any running applications, games, utilities, and multimedia applications.
5. Uninstall the previous version of the HP driver software if any is installed.
6. Run the downloaded .exe file. Follow the screen directions presented during the software installation.
7. When the software portion of the installation is complete, you will see a "Software Copied Successfully" dialog box with a prompt to "follow the instructions on your setup poster to set up your HP OfficeJet G Series hardware". The instructions below are contained in your setup poster.
8. Select [Finish] on the "Software Copied Successfully" dialog.
9. If a request to restart your computer dialog appears, select [yes] to reboot the computer.
10. Turn on your HP OfficeJet G Series device, and if using USB then reconnect the USB cable between it and the computer, or if using the parallel port then reconnect the parallel port cable between it and the computer.
11. During the Plug & Play phase, a "Found New Hardware Wizard" dialog will appear.
12. Select [Next], then [Next], then [Finish] buttons to continue. On some computer it may take a few minutes to install the software.
13. The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
14. Complete the HP Fax Setup Wizard, if it appears.
15. Complete the Electronic Registration, if you have not already done it once.
16. When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
17. Upon completing the software installation, enable your antivirus software.
18. View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help

OfficeJet G Series Driver Version 3.10 Installation Instructions for network connections using a HP Jetdirect box follow:

1. Download the web package driver file.
2. Connect the G series to the Jetdirect box and the Jetdirect box to the network.
3. Temporarily disable antivirus software.
4. Exit any running applications, games, utilities, and multimedia applications.
5. Uninstall the previous version of the HP driver software if any is installed.
6. Run the downloaded .exe file. Follow the screen directions presented during the software installation until you reach the dialog titled "Setup Type" .
7. Select the option for "Networked".
8. The HP network installation wizard will start. Follow the instructions in the dialogs that follow to search for the HP officejet G series on the network and install the drivers.
9. The desktop icon will be created, and the HP system tray icon will appear in the lower-right corner of the taskbar. The HP Fax Setup Wizard or Electronic Registration will appear depending the features of your HP OfficeJet G Series device.
10. Complete the HP Fax Setup Wizard, if it appears.
11. Complete the Electronic Registration, if you have not already done it once.
12. When the "Congratulations!" dialog appears, select [Skip Tour], since it is not included in the web driver package.
13. Upon completing the software installation, enable your antivirus software.
14. View the Readme file or the Onscreen User Guide for further information related to the operation of this driver software. If you chose the default installation location then the Readme.html file will be located in the path:
C:\Program Files\Hewlett-Packard\AiO\hp officejet G series\Help

NOTE: Due to the size of the download and the time it would take, HP recommends ordering the CD-ROM version rather than downloading the Web version of the driver without broadband (Cable, DSL, T1, or equivalent) Internet access. To order the CD use the "Back" button to display the previous page and select the software beginning with CD.