Arctic Cooling MX-4
Performed better than the competition.
Quite a lot of paste in the tube.
Easy to use.
Enough for several applications in the syringe.
Comes in syringe for easy application.
Thin and spread easily.
Slight improvement over other compounds.
Starts to dry pretty quick.
No available instructions for novices.
By ThinkComputers on December 09, 2010
The Arctic Cooling MX-4 was one of the best thermal pastes I have used in a long time. It wasn’t as thick as other thermal pastes but it gets the job just as well if not better. In the temperature tests I ran, I only saw a 3-6c difference in the...90
By OverclockersQH on November 17, 2010
The Arctic MX-4 Thermal Paste works as advertised. It kept my CPU cool under the most stress I could place upon it for 30 minutes. I would be comfortable using this product on any of my systems.Pros: Easy to use (if your experienced)Enough for...-
By Kitguru.net on September 10, 2010
A truly great product that rectifies every issue we had with its predecessor. Anyone looking for a decent thermal compound should definitely consider this...100
By MadShrimps on August 24, 2010
The MX-4 thermal compound from ARCTIC COOLING is definitely an improvement since the last generation when it comes down to application as it’s easier to spread, unfortunately in my tests the performance difference was negligible.If you’re in...-
By Vortez on July 29, 2010
Concluding the ARCTIC MX-4 is a lot harder this time than it was last year with the release of the ARCTIC MX-3. Back then, it was clear that ARCTIC was ahead of its competition, ruling the roost unchallenged. But the world of thermal paste moves...-
By DragonSteelMods on June 25, 2010
There's no doubt that the Arctic MX-4 will give you an improvement in the temperatures of your CPU or whatever else you might want to use it with. The Arctic MX-4 is also inexpensive and a lot of it comes in the convenient syringe so you'll get...100
By HardwareHeaven on June 14, 2010
Arctic MX-4When comparing the new formula MX-4 to its predecessor, MX-3, we found two significant improvements. The first is that MX-4 spreads much better, very important for those who like to coat the CPU heatspreader before installing a cooler....100
By techno-kitchen.com on December 24, 2010
Нет обзора отрывок...-
By PcHS.IT on October 26, 2010
Con la nuova MX-4 Arctic propone un degno successore alla fortunata MX-3, e anche con caratteristiche fisiche diverse riesce a mantenere ottime performance. Tra le caratteristiche di questa pasta termica segnaliamo anche la facilità con cui si...100
By Hardmodding on October 25, 2010
Desde siempre nuestro enemigo público para nosotros los modders/geek son la temperatura excesiva que alcanza a veces nuestro CPU, VGA, CHIPSET, ETC son muchas las medidas que tomamos, para apalear esta situación… desde cambiar el cooler...-