also @ TechSpot: HP TouchPad running Android 4.0 Ice Cream Sandwich
Welcome to the TechSpot OpenBoards. Please read the FAQ if you have any questions. Sign up or Login to participate.

Go Back   TechSpot OpenBoards > TechSpot Community > General Discussion

Collaborate in the cloud with Office, Exchange, SharePoint, and Lync

Safely transporting PC. Precautions??

Reply
Thread Tools Search this Thread
  #1  
Old 06-14-2004
Steve B's Avatar
TechSpot Member
 
Location: Perth, Western Australia
Member since: Apr 2004, 107 posts
Safely transporting PC. Precautions??

I'm housesitting soon, so old faithful is coming with me. The last time I took it in the car, the Hard Drive pooed itself. Maybe coincidence, maybe vibration??

I dont wanna go through re-installing everything, let alone the expense of a new drive.

Anyone got any CONSTRUCTIVE ideas (I mean not "drive slower" etc...) I did keep 2 wheels on the ground
  #2  
Old 06-14-2004
Rick's Avatar
TechSpot Special Forces
 
Location: Los Angeles, CA
Member since: Feb 2002, 5,600 posts
Just use common sense. Perhaps sandwich it between a number of pillows, bed sheets or towels in a secure place where it won't be tilting back and forth.

When I shipped my computer via UPS, something I did was take the important parts out (Hard drives and heatsink because it could have fallen off and damaged components if jarred enough etc..) and ship them seperately, to ensure they were wrapped properly and not thrown around. Because that is what happens with large, bulky items... They get thrown around.

Perhaps you can apply this idea to your move.
  #3  
Old 06-14-2004
Godataloss's Avatar
TechSpot Booster
 
Location: Lorain, Ohio
Member since: Oct 2003, 501 posts
Ground yourself before you take the pc out of the car. Riding in cars and sliding around on the seats actually generates alot of static electricity. A considerable number of people blow themselves up every year refuling their cars because they get back into the driver's seat while fuleing because of poor weather and such-then when they get out to remove the nozzel from the tank-KABOOM!
  #4  
Old 06-14-2004
Steve B's Avatar
TechSpot Member
 
Location: Perth, Western Australia
Member since: Apr 2004, 107 posts
Static electricity... ahhh, now I sometimes get a good blast getting out of the car. A hairraising experience. I'd better put an antistatic strap on it.

They were everywhere in the 70's and 80's, but you don't see em much anymore...

It could just be the awesome power of my $500 '84 Toyota Corona...It does awesome "keybangers" though...You know, coast, turn the key off, press the accelerator, key on and BANG!!!!

Hilarious in the right circumstances, and I'm in my 30's...
2nd childhood? never finished the 1st.
  #5  
Old 06-14-2004
Akio's Avatar
TechSpot Enthusiast
 
Location: Seattle, WA
Member since: May 2004, 262 posts
Maybe you should get a laptop.... But yeah, like Rick said

Quote:
Rick: Just use common sense. Perhaps sandwich it between a number of pillows, bed sheets or towels in a secure place where it won't be tilting back and forth.
That's what I do everytime I bring my computer to work, friends house, brothers house, anywhere for that matter.
  #6  
Old 06-15-2004
TechSpot Addict
 
Location: Jefferson City, MO, USA
Member since: Oct 2002, 703 posts
Along the same lines of securing the case as a whole, be sure your screws inside are tightened up (not obscenely, just not loose). I'm not sure what precautions would be reasonable for a CPU/Heatsink, but I would think there'd be a way to secure those slightly better than just sitting there.

When I've transported my machine, it typically goes in the back seat footwell, with padding around it. That way I can use the seat to secure it from wiggling too much. On occasion, though, I've seatbelted them in when I knew it'd be safe for the scenario.

If you're overly concerned about this component, or that one, you can always yank it as Rick said and pack it seperately as to pad it. Of course, static is bad, so keep it in mind.

Final word of advise.. cars get hot in the summer, cold in the winter. Take into consideration the thermal factors.. crack the windows, and let the machine sit for a bit after moving it back inside to let it reacclimate to the conditions without causing undue condensation or other problems.
  #7  
Old 06-15-2004
Steve B's Avatar
TechSpot Member
 
Location: Perth, Western Australia
Member since: Apr 2004, 107 posts
I spoke to one guy who recommended securing it HORIZONTALLY so the heads dont scratch the hard disc itself. It would also take pressure off the heatsink mounts too I 'spose.

I've still got a few weeks to knaw my fingernails before going...
  #8  
Old 06-15-2004
Arris's Avatar
TechSpot Evangelist
 
Location: Aberdeen, Scotland, UK
Member since: Feb 2002, 4,083 posts
System specs
I think if the HDs are newer than about 8-10 years old I don't think you have to worry about the heads doing anything. They should be parked securely when the computer is shutdown. I've read the labels on some of the disks I've owned and they've had g-force shock ratings of what the disks can take
  #9  
Old 06-15-2004
Steve B's Avatar
TechSpot Member
 
Location: Perth, Western Australia
Member since: Apr 2004, 107 posts
Maybe the old Seagate 20 gig had Female heads....

Couldnt park properly



(runs away to hide)
  #10  
Old 06-15-2004
Arris's Avatar
TechSpot Evangelist
 
Location: Aberdeen, Scotland, UK
Member since: Feb 2002, 4,083 posts
System specs
Quote:
Originally posted by Steve B
Maybe the old Seagate 20 gig had Female heads....

Couldnt park properly



(runs away to hide)
*groan*

LOL
  #11  
Old 06-15-2004
Vehementi's Avatar
TechSpot Paladin
 
Location: Bellevue, WA
Member since: Feb 2002, 3,199 posts
System specs
Quote:
Originally posted by Steve B
It could just be the awesome power of my $500 '84 Toyota Corona...It does awesome "keybangers" though...You know, coast, turn the key off, press the accelerator, key on and BANG!!!!
I do hope you're not driving an automatic

But I brought my box with me on a trip one time, it was on a plane, and I left my 1kg or so heatsink screwed in, and I fried a system board. Returned it to newegg and it was alright, no cost to me, but my it was inconvenient

Now I take the hard drives (all 5 of them ) and the heatsink out whenever I ship it.
  #12  
Old 07-29-2009
Newcomer, in training
 
Location: Cincinnati, Ohio
Member since: Jul 2009, 3 posts
Need help transporting computer, fedx, UPS, USPS?

My son has a very expensive computer that he left out in Arizona where he went to school, and came home by Greyhound to Ohio.

He doesn't know the best way to send his computer -- and since he is a college student, he doesn't have a lot of money.

Any suggestions or your own experiences?

Thanks!
Reply

Similar Topics
Topic Replies Forum
Anti-static Precautions! 19 Overclocking, Cooling and Modding
Anti-static precautions 4 Processors and Motherboards
Transporting desktop on a trip. Need ideas. 10 Other Hardware
What precautions to be taken while opening the case 5 Overclocking, Cooling and Modding
CPU storing/transporting 2 Processors and Motherboards

Thread Tools Search this Thread
Search this Thread:

Advanced Search
All times are GMT -4. The time now is 03:54 AM.