[COLOR=Red]DON"T BOTHER WITH THIS TOP POST I FIGURED IT OUT , GO TO SECOND POST THIS THREAD[/COLOR]


hello
hope this is ok in the forum

i have a ford aerostar 1996
no power windows or locks
or anything else

the alarm is a clifford arrow 5
new

i have the alarm installed
it works good
the problem i am having is
i can't figure out whitch wires to use
for the lites front and back to flash when i arm the alarm
the alarm has two white wires out from the brain
that i am soppose to use
they do put out the power to power the lites
but i can't seem to wire them into the wiring of the van
for them to work right
the way i have them the dash lites flash
and when signaling one way
they all flash
so that aint right

i got another problem too
but i'll save that till this is figured out
please help

i did figure that one out an hour ago
i ran from the common tail lite wire
that powers them all
from the main lite switch
works well now

the other problom i'm having is
the starter interupt
it don't work
or i have it hooked up wrong
i use the wire that run from the key switch to the starter relay
i know this is a good wire to use
because if i disconect that wire
the van will not start
so that must be it
but when i run the alarm wires to it
that are soppose to cut the circuit when alarm triggers
it still starts