Welcome to the TechSpot OpenBoards. Please read the FAQ if you have any questions. Login to participate.
Abit worried about my Temperatures
|
|||||||
![]() |
| Thread Tools |
|
#1
|
|||
|
|||
|
Abit worried about my Temperatures
Hi , are these temperatures too hot ?
CPU 53C (idle) System temp 28C (idle) My fan speeds are ..... CPU around 4600rpm ... 120mm exaust around 1600rpm My system currently has a 120mm exaust fan at the back. I am thinking of replacing that fan with a more powerful one to suck more air out , and I also have a grill on the side to fit another 120mm fan blowing air in. I figure that should get things a little cooler but i just want to know if my temps are normal ? thanks ................ John |
|
#2
|
|||
|
|||
|
Just played UT2004 for 30 mins and my temps have gone up to...........
CPU temp 66C................System temp 30C I know the Prescott chips run hotter , but are these temps ok ? thanks.......John |
|
|
|
#3
|
||||
|
||||
|
66C is hot, but not too hot nor dangerous for the Prescotts, and depending on the system configuration can be quite normal.
You're just fine, and I wouldn't worry unless you start to get system instability during cpu-intensive tasks. |
|
#4
|
|||
|
|||
|
Thanks for the reply , eases my mind
Still gonna fit the other fan though , just to see if I can bring it down a couple of degrees |
![]() |
| Thread Tools | |
|
| Similar Topics | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| ABIT IS7-V2 Mobo - problems booting up | Danamack | CPUs, Chipsets and Mobos | 2 | 03-19-2005 07:25 PM |
| Abit AN7 mainboard is unstable when CPU multiplier is set to 11.5x | Nic | CPUs, Chipsets and Mobos | 1 | 02-08-2004 04:41 AM |
| Abit confirms it's going for ATI | Julio | Old Frontpage News & Comments | 5 | 01-14-2004 05:36 AM |
| Ultimate motherboard (Abit AT7) | boeingfixer | CPUs, Chipsets and Mobos | 8 | 04-18-2002 07:54 PM |
| Abit says BD7-RAID "recall" a hoax | uncleel | News & Interesting links | 0 | 02-08-2002 08:55 PM |
All times are GMT -4. The time now is 09:06 AM.



