USB port cannot install?!?!?

I've been having this problem for a while now, but by looking through some google groups post I've been able to find the recovery! So I'm spreading the good word!

SYMPTOMS
When I attach one of the problematic devices, the Found New Hardware wizard
starts up, but ultimately returns the errors:


"Cannot Install This Hardware

There was a problem installing this hardware:

[device name here]

an error occured in the installation of the device

The data is invalid."


In place of "[device name here]" as described above, my screen would say "USB 2.0 FD".

I recieve this message whenever I try to attach
- Sony DSC (some Sony digital camera, I don't remember the model)
- Creative Zen Vision:M
- PNY Attache USB 2.0 2 GB thumb drive

When I wrote this post, I only had the PNY, but the fix below worked. I'm pretty sure the same procedure will fix the problem with my other devices.

Recovery
1. Start > Run > regedit
2. Dig to the folder ...
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\
Next, you may see a series of folders named Vid_XXXX&Pid_XXXX.
3. Flip through each Vid_ folder, looking at Name "LocationInformation" for the value "USB 2.0 FD", or whatever you had in your Error message.
4. To make sure you find the correct folder, go to Device Manager (How? Right-click "My Computer" > Properties > Hardware tab > Device Manager button). When inside Device Manager, look for a yellow icon with a question mark, possibly labeled "USB 2.0". Double-click the icon which will open the Properties window, click on Details tab. The default selection will be "Device Instance Id", and the value of that should be in the text box below. This value should look something like "USB\VID_154c&pid_0009\". This should match the name of the folder from step 3.
5. Right-click the Vid_ folder > Permissions > Permissions for Everyone > check Allow for Full Control
6. Exit. Best of all, you don't have to reboot!

Here is where I was able to get this information

http://groups.google.com/group/micr...his+hardware+usb+data+is+invalid&rnum=5&hl=en