Here's a neat little interactive pin mod guide I found for all you AMD overclocking fans. Check it out.

Good find.

It's a shame they don't have anything for the Duron. I have a 800mhz Spitfire Duron & I wanted to lower the Multiplier to 6 & crank the FSb to 133 ( 6*133=800 ) because the K7VT2 that I'm getting for it doesn't support multiplier changing.

I was looking for this link.

The page is now -> http://www.warp2search.net/modules.p...icle&sid=12478

Or you can go straight to the Pin-mod HERE.

Good find, but isnt just connect the 5th L1 bridge with conductive ink easier then wrapping pins with wire, and soldering pins?

Also,

http://www.ocinside.de/go_e.html?/ht...md_pinmod.html

Here they say to drill a little gap between the bridges, fill it with some kind of thermal compound,etc, and then paint over it connecting the bridges... I never "isolated" my cpu the way they do, I just put the conductive ink over the bridges and went off. Recon im ok?

I also did this on my friends 2600+ TBred, and for some reason it didnt unlock the bridges. They say:

Recon the multi is permently set now? I've never read this anywhere else so I dunno.

unfortunatly nothing works on these new super-locked bartons - not bridging pins or bridging....bridges - nothing works

Steg

The Speed Strip still works on them.

Speed Strip looks great, but its such a rip off.. plus shipping kills it since you gotta buy it online.

Surely, if the speed strip works, then a pin mod that connects the same pins as the speed strip does will work also ???