I have w2k professional on my computer but I want to erase everything and format my hard drive, make 2 partition (C: and D and fresh install w2k. Which is the best way to do this?
Thanks

Hello and welcome to Techspot.

These instructions are for Windows XP, but should work equally well for Windows 2000.

You need to do the following.

1 Restart your computer and go to setup usually by pressing the F2 or delete key.

2 Once you get into setup look for the boot menu and make sure you set it to boot from cd first followed by your hard drive.

3 Put the Windows disk into your cd.

4 Now save your settings and exit setup.

5 While your computer is booting you will see a message that says "press any key to boot from cd" press any key.

6 When the welcome to setup screen appears press enter and then press F8 to accept the Microsoft licence agreement.

7 You will be prompted to repair an insallation press the escape key.

8 Now select the partition that you want to reformat and press the D key to delete it you will be asked to confirm that you want to delete the partition.

9 Now press C to create a brand new partition you will be asked what size you want the partition to be in mega bytes. If you just press enter then the partition will be the maximum size that you can have. This is perfectly ok if you don`t want to create multiple partitions.

10 You will now be asked to format the partition select the ntfs file sytem and do a full format.

11 Once the format is complete setup will continue.

Your computer will restart during the remaining setup again you will be asked to press any key to boot from cd DO NOT PRESS ANYTHING. and setup will continue. Once the setup is complete and you are back in Windows remove the Windows cd from your cd drive.

Regards Howard