Welcome to the TechSpot OpenBoards. Please read the FAQ if you have any questions. Login to participate.

Go Back   TechSpot OpenBoards > Hardware & Tweaking > Overclocking, Cooling and Modding

Cpu fan stops cpu gets hot and computer shuts down...

Reply
Bookmark / Share this page
Thread Tools
  #1  
Old 02-12-2008
Newcomer, in training
 
Member since: Feb 2008, 4 posts
Cpu fan stops cpu gets hot and computer shuts down...

hey guys, as you see my title what i wrote thats true my cpu fan stops and cpu gets worm and computer shuts down..i have no idea what the problem could be..i put cpu cable to cpu fan plug computer starts perfectly..then after some time it just shuts downs..when i put cpu fan cable to system fan 1 plug it works at 100% and it doesnt shut down because motherboard makes it to work..by her self. but why it gets worm and why the fan stops at cpu fan plug... i got Intel Core 2 E6600 LGA775 Conroe 2.40GHz (1066FSB)
i Got X-power ATX-600TD power suply,ASUS 7950GT 512mb video card,OCZ 4GB (2x2GB) PC2-5400C5 Dual Channel Vista Upgrade Gold Series DDR2 memory...and i got GIGABYTE S-series motherboard GA-P35-S3...if any of you had similar problem or you got suggestions please tell me..thanks..
Reply With Quote
  #2  
Old 02-12-2008
CCT CCT is offline
TechSpot Evangelist
 
Location: Canuckistan
Member since: Apr 2007, 3,143 posts
I think you should read your manual about Bios settings for fan operation on the mobo re the cpu - under 'PC Health Status' I think you'll find some guidance.
Reply With Quote
You can remove this banner by registering, join the TS Community for free.
  #3  
Old 02-12-2008
Newcomer, in training
 
Member since: Feb 2008, 4 posts
i have red it but i didin't actually find anything.i guess i'm only the one who having this problem.i havent find anyone who had or have a similar problem. thanks for suggestion CCT anyway.
Reply With Quote
  #4  
Old 02-12-2008
Eddy Rassy's Avatar
TechSpot Member
 
Location: toronto
Member since: Dec 2004, 105 posts
The cpu fan connector has 4 pins: control, sensor, +12v and ground, while the sys fan connector has 3 pins only (no control) make sure the control wire is there in the connector and is inserted properly and making contact with the board.
just a thought, good luck
Reply With Quote
  #5  
Old 02-13-2008
Newcomer, in training
 
Member since: May 2007, 30 posts
System specs
Like CCT said Read the manual. there is a surprising amount of info in that little book. And its not surprising how many people we, here at, see on a weekly basis who have done something minor, incorrectly that leads to a major problem like CPU overheating.
Reply With Quote
  #6  
Old 02-13-2008
captaincranky's Avatar
TechSpot Guru
 
Member since: Oct 2006, 2,052 posts
Survey Says.......

"Award" BIOS es usually have a function they call "CPU Smart Fan" or similar. If you disable that function, the CPU fan will run full blast. Some fans will not continue to run or restart if the voltage is, or drops too low. Anyway, like everyone has said an explanation off this should be in the mobo manual.
Reply With Quote
  #7  
Old 02-14-2008
Newcomer, in training
 
Member since: Feb 2008, 4 posts
i have solved it.
Reply With Quote
You can remove this banner by registering, join the TS Community for free.
  #8  
Old 02-14-2008
CCT CCT is offline
TechSpot Evangelist
 
Location: Canuckistan
Member since: Apr 2007, 3,143 posts
Noone else will say this, so: Let me guess, the answer was '42' - Right?
Reply With Quote
Reply
Thread Tools

Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
My computer stops working. Urgent Help!! Tubbychubby CPUs, Chipsets and Mobos 5 12-07-2007 05:54 PM
Computer Freezes Up Randomly, Then Monitor Stops Working clarkess3 CPUs, Chipsets and Mobos 5 10-28-2007 04:37 PM
computer stops at initial start up after boot from cd prompt wwwok53 Other Hardware 2 07-03-2006 10:27 PM
Filthy computer stops dead mucklucks CPUs, Chipsets and Mobos 14 07-14-2005 08:51 PM
WinXP standby stops computer? a2ps Windows OS 5 02-19-2004 04:42 PM


All times are GMT -4. The time now is 03:17 PM.