CS:S loading screen problem any1 who can help?

Status
Not open for further replies.
right , i just installed CSS and i was all happy but when it runs it get to the part with t's and ct's holding guns with loading in bottom right corner , but when it actuly loads my screen just go's pitch black and cant see anything, any1 know what to do?

Thanks

Japan neo
 
Let's start by listing your computer's specifications to see what we are working with. Don't forget to include the power supply, besides wattage, the amps on the 12V rail or rails.

Also, try running the Stress Test to see what kind of frames/sec your are getting.
 
i have a fujitsu simens laptop , intel entrino duo , dule core on a 54.0mbs conection

operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp.050928-1517)
Language: English (Regional Setting: English)
System Manufacturer: FUJITSU SIEMENS
System Model: AMILO Pi 1505
BIOS: Ver 1.00PARTTBL
Processor: Genuine Intel(R) CPU T2050 @ 1.60GHz (2 CPUs)
Memory: 502MB RAM
Page File: 361MB used, 865MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode

Card name: Mobile Intel(R) 945GM Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Intel(R) GMA 950
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_27A2&SUBSYS_10C71734&REV_03
Display Memory: 128.0 MB
Current Mode: 1280 x 800 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ialmrnt5.dll
Driver Version: 6.14.0010.4543 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 3/23/2006 11:38:50, 45694 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ialmnt5.sys
Mini VDD Date: 3/23/2006 11:47:06, 1166972 bytes
Device Identifier: {D7B78E66-64E2-11CF-3B65-CD30A2C2CB35}
Vendor ID: 0x8086
Device ID: 0x27A2
SubSys ID: 0x10C71734
Revision ID: 0x0003
Revision ID: 0x0003
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available


is that enough?
 
Your integrated graphics chip does not meet the graphics adapter requirements of CS:S. You'll need a real graphics card to run it and since I doubt you can install one in your laptop, you'll need something else to run it.
 
Status
Not open for further replies.
Back