DVD burner not burning

Status
Not open for further replies.

hyabusa

Posts: 17   +0
I've tried multiple types and it will not write to anything. Up until about a couple weeks ago, I had no problem at all. I was using Nero before it started acting up. I unistalled it and downloaded Roxio, and now I'm back to Nero again. Here is the error log


1C82-0000-19E5-MAAX-4007-5448-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.9.6.0
Internal Version: 7, 9, 6, 0
(Nero Express)
Recorder: <BENQ DVD DD DW1620> Version: B7W9 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 1 - 7.9.6.0
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800EB-11DJF0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 3 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
BENQ DVD DD DW1620 E: CdRom0
Generic DVD-ROM G: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 959MB (982320kB)
Free physical memory: 298MB (305956kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.9.2007
ISO compilation
2:53:42 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

2:53:42 PM #2 Text 0 File Isodoc.cpp, Line 6663
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

2:53:42 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

2:53:42 PM #4 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

2:53:43 PM #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 1155295 (256:43.70, 2256MB)

2:53:43 PM #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)

2:53:43 PM #7 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: BENQ DVD DD DW1620, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

2:53:43 PM #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:53:43 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1155296 (1155296) = #1155296/256:43.71
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1155296 blocks [E: BENQ DVD DD DW1620]
--------------------------------------------------------------

2:53:48 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: BENQ DVD DD DW1620] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2366046208, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1155296 | 0 | 0x00
1155296 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

2:53:48 PM #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

2:53:48 PM #12 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

2:53:48 PM #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

2:53:48 PM #14 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

2:53:48 PM #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

2:53:48 PM #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5,540 KB/s)

2:53:48 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:53:48 PM #18 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode for Multisession

2:53:48 PM #19 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: No

2:53:48 PM #20 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

2:53:48 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

2:54:16 PM #22 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
Buffer x08250040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

2:54:16 PM #23 CDR -1135 File Writer.cpp, Line 303
Write error
E: BENQ DVD DD DW1620

2:54:16 PM #24 Phase 133 File dlgbrnst.cpp, Line 1762
Writing short lead-out

2:54:23 PM #25 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was -1 (FFFFFFFFh)Close Session/Border, function 2, track: 3, finalize disc: YES, ret: 0

2:54:23 PM #26 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5,540 KB/s)

2:54:24 PM #27 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

2:54:26 PM #28 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

2:54:26 PM #29 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

benqdvddddw1620b7w929seqi8.png
 
Hello, hyabusa, and welcome to Techspot :wave:

Please take a look at the following threads to make your experience here as enjoyable as possible :)

Message for all newcomers

SNGX1275's Guide to making a good post/thread

The Techspot FAQ

If you could take a minute to fill in some of your profile information that would be helpful to all members of the forum :)
Knowing someone's location in the world can be extremely helpful, even if you just put a country.

Also remember to post any problems or questions that you have in the appropriate forums

With regards to your problem, please attach logs as attachments as per the instructions here, then i will gladly see what's up. That link refers to a specific program but you can apply it to your log ;)

By the sounds of it though you may need to install updated drivers
 
you don't need to know the specs of your pc, i put the link for editing your profile so that you can put a location in

lots of people don't and it's a very handy piece of information :)
 
Thanks. My location is in. So is there anyone that can help with my problem? I think maybe it could have something to do with a virus perhaps. My CPU keeps jumping up to 100%
 
Status
Not open for further replies.
Back