1. TechSpot is dedicated to computer enthusiasts and power users. Ask a question and give support. Join the community here.
    TechSpot is dedicated to computer enthusiasts and power users.
    Ask a question and give support.
    Join the community here, it only takes a minute.
    Dismiss Notice

help needed on BTVOYAGER router network setup

By sumit_gautams
Oct 24, 2007
  1. Hi,
    I recently bought a BTVOYAGER1500-91Router,and have been trying to setup a small home network system but its causing lots of problems in the setup ,for instance there are three laptops in my household only one an acer aspire can connect to it.Eventhough all systems connected through a wired connection and work perfectly when wired but don't connect to the net when in wireless mode except for the aspire which works perfectly in wireless as well....I tried to manually configure the IP ,DNS addresses based on what i saw in the Aspire details but then the system connected to the router but didn't connect to the net ....i used the nslookup thing and it didn't work ...gave an unknown server problem...pinging worked though

    the details for the aspire connection is as follows:

    Connection-specific DNS Suffix:
    Description: Atheros AR5005G Wireless Network Adapter
    Physical Address: 00-19-7D-40-1B-50
    DHCP Enabled: Yes
    IPv4 IP Address:
    IPv4 Subnet Mask:
    Lease Obtained: 24 October 2007 16:39:11
    Lease Expires: 30 October 2007 22:28:25
    IPv4 Default Gateway:
    IPv4 DHCP Server:
    IPv4 DNS Servers:,
    IPv4 WINS Server:
    NetBIOS over Tcpip Enabled: No
    Link-local IPv6 Address: fe80::d1f6:b2e1:f6db:f017%9
    IPv6 Default Gateway:
    IPv6 DNS Server:

    can some one please help in this ...i'm bit confused on this because the ip adddress to connect to the router is a kindof weird one....

    which I'm not the familiar with as most often i remember doing was or a

    PLease Help

    Thank You
  2. AlbertLionheart

    AlbertLionheart TechSpot Chancellor Posts: 2,026

    Hi - you must be in UK
    These BT things either work or they don't and I have seen many that are fit only for the bin.
    Reset it by pressing (with a pin or something better than a pen) the reset button for 20 secs and then finding the routers ip address with ipconfig. Key that number into internet explorer and that should open the set up page. is OK for a fixed ip address for the router, btw.
Topic Status:
Not open for further replies.

Similar Topics

Add New Comment

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...