Help Needed!

By merl1988 ยท 5 replies
Jul 16, 2007
  1. Heyy i was cleaning the inside of the pc and got the Power LED, H.D.D LED and Pwer SW mixed up, now my pc automatic starts as soon as i plug it in but nothing will come on the screen it just has the on botton on.

    My model no is - ATX-250-12E

  2. CCT

    CCT TS Evangelist Posts: 2,653   +6

    Your motherboard manual should have a diagram with the front panel connector pinout - match the front panel devices to the pinout.
  3. merl1988

    merl1988 TS Rookie Topic Starter

    I don't have no diagrams any more just the pc itself :-(
  4. k.jacko

    k.jacko TS Rookie Posts: 493

    Then look closely at the mobo, they usually have the letters printed next to the pins. You may need a magnifying glass though.
  5. merl1988

    merl1988 TS Rookie Topic Starter

    Yeah i seen where they meant to go, but it still just lights up and the fan starts as soon as i plug it in and does nothin else
  6. pushkarn

    pushkarn TS Rookie

    Take a close look at your mobo...match the letters printed below the pins with the respective connector...connect with the proper polarity (i.e. positive and neagtive)...there wont be any problem even if you by mistake reverse the polarity...check the position of restart and turn-on buttons very carefully...or search the net for your mobo's pin diagram...
Topic Status:
Not open for further replies.

Similar Topics

Add your comment to this article

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...