S3 Graphics ProSavageDDR video card

Status
Not open for further replies.
i have vido card witch not working good
i try to make the test of dirct x but direct drow is not working !!!
what can i do
my fideo card is:

Card name: S3 Graphics ProSavageDDR
Manufacturer: S3 Graphics, Inc.
Chip type: S3 ProSavage DDR
DAC type: S3 SDAC
Device Key: Enum\PCI\VEN_5333&DEV_8D04&SUBSYS_02351297&REV_00
Display Memory: n/a
Current Mode: 800 x 600 (32 bit) (60Hz)
Monitor: Plug und Play-Monitor
Monitor Max Res: 1600,1200
Driver Name: s3gnb.dll
Driver Version: 6.14.0001.0007 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 3/13/2003 13:11:30, 396416 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: Nicht zutreffend
Mini VDD: s3gnbm.sys
Mini VDD Date: 3/13/2003 13:11:50, 166528 bytes
Device Identifier: {D7B75DD3-CE44-11CF-2071-3422A1C2CB35}
Vendor ID: 0x5333
Device ID: 0x8D04
SubSys ID: 0x02351297
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Not Available
D3D Status: Enabled
AGP Status: Not Available
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
 
Have you tried visiting the Savage S3 website, where all their drivers are listed? You seem to have enough information to be able to identify the driver(s) that you might need and should be able to download the correct one from there.
 
It's a motherboard-integrated card I believe so going to the motherboard manufacturer's website and searching there will probably bear results.
 
Status
Not open for further replies.
Back