That blue screen three hours after memory upgrade!

By Kay
Feb 19, 2006
  1. Hi All,

    Replaced a friends 256 memory with two 512, exact same kind only MB different, machine can take up to 1 gig, rebooted,computer fine for three hours, went to install a wireless adapter, and got that Blue scrren saying conflict. Deleted adapter, same blue screen, replaced her old memory and booted fine. Reinstalled wireless adapter, that works fine....what would make a computer reject memory that it was running for three hours? I did have a hard time getting one of memory in one of the slots, could this slot be bad? Any ideas would be helpful! Thanks

    add on: This was on the blue screen

    0x00000000 " "
  2. Nodsu

    Nodsu TS Rookie Posts: 5,837   +6

    Always test the RAM after playing around with it :)

    Remove and reseat the memory modules.

    If problems persist, try less aggressive memory timings in BIOS - bigger memory is often slower.
  3. KingCody

    KingCody TS Evangelist Posts: 992   +8


    Some system specs would help. What brand and model# is the machine (or mobo) and what brand and model# are the RAM sticks. And what slots do you have them installed in?
Topic Status:
Not open for further replies.

Similar Topics

Add your comment to this article

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...