I want to upgrade my Supermicro X5DAL-TG2 mobo in order to accommodate a GeForce 7800 video card. I want to salvage as much of my existing system as possible: two Xeon 2.8s, 4x512 MB 180 pin Kingston RAM, Adaptec dual 160 SCSI controller card, NewTek VT card (32 bit PCI). Which dual Xeon board would you recommend?
Upgrade a dual Xeon mobo to add PCI Express
- Thread starter pathlight
- Start date
- Status
Jaquio
Posts: 26 +0
as usual... im a MSI lover... so ill recommend you the followin MoBo with its Specs...
http://www.msicomputer.com/product/p_spec.asp?model=E7520_Master-S2M&class=spd
12 in (L) x 13 in (W), SSI EEB 3.0 form factor
• 8 DIMMs w/ DDR266 up to 32GB or 8 DIMMs w/ DDR 333 upto 24GB
• 1 PCI; 2 PCI-X(100MHz): 1 PCI-X (133MHz); 2 PCI-E 8X
• SCSI interface Adaptec AIC-7902 Ultra-320; Support Dual channel SCSI Ultra 320; Support Adaptec ZCR (Zero-Channel RAID)
• Dual Gb LAN; On board graphic; MSI server management IPMI 1.5
Remember to check you socket type in order to get the right one...
Regards from Panama
http://www.msicomputer.com/product/p_spec.asp?model=E7520_Master-S2M&class=spd
12 in (L) x 13 in (W), SSI EEB 3.0 form factor
• 8 DIMMs w/ DDR266 up to 32GB or 8 DIMMs w/ DDR 333 upto 24GB
• 1 PCI; 2 PCI-X(100MHz): 1 PCI-X (133MHz); 2 PCI-E 8X
• SCSI interface Adaptec AIC-7902 Ultra-320; Support Dual channel SCSI Ultra 320; Support Adaptec ZCR (Zero-Channel RAID)
• Dual Gb LAN; On board graphic; MSI server management IPMI 1.5
Remember to check you socket type in order to get the right one...
Regards from Panama
- Status
