WinXP Pro SP2 BSOD / System Failure

By damoon ยท 4 replies
Sep 20, 2007
  1. Daveskater

    Daveskater Banned Posts: 1,687

    Hi, damoon, and welcome to Techspot :wave:

    Take a look at the following threads to make your experience here as enjoyable as possible :)

    Message for all newcomers

    Guide to making a good post/thread

    The Techspot FAQ

    If you could take a minute to fill in some of your profile information that would be helpful to all members of the forum too :)
    Knowing someone's location in the world can be extremely helpful, even if you just put a country.

    Also remember to post any problems or questions that you have in the appropriate forums :)

    With regards to your problem, have a read through this thread and see if that helps.

    also, can you boot into safe mode?

    p.s. in future can you please attach logs, dumps etc as attachments (here are some instructions - they're for hijack this logs but you will be able to tell what bits are applicable) :) thanks
  2. damoon

    damoon TS Rookie Topic Starter

    Ah, thanks and sorry bout the whole post thingy.

    My Specs :
    AMD Athlon 64 X2 3800+
    Asus A8N-SLi Premium
    1024mb Kingston DDR 400 RAM
    Western Digital 80gb SATA, WD 20gb PATA slave.
    ATI Radeon x550SE
    Temps are decent i think, ranging from 40 - 46C
    Vcore 1.31v,
    +3.3, at 3.31v
    +5.0, at 5.03v
    +12.0, at 11.84v
    Fan at 5818RPM.

    I did memtest earlier and it passed.
  3. AlbertLionheart

    AlbertLionheart TechSpot Chancellor Posts: 2,026

    Download the western digital drive diags and run them - first thing to check after the RAM is the hard drive. PSU looks OK so far.
  4. damoon

    damoon TS Rookie Topic Starter

    okay. downloading it right now :)
Topic Status:
Not open for further replies.

Similar Topics

Add your comment to this article

You need to be a member to leave a comment. Join thousands of tech enthusiasts and participate.
TechSpot Account You may also...