Whichever is currently running an operating system
Whichever is attached to your motherboard's first SATA port
Neither drive is the master
Both drives are the master
Choose your answer and the correct choice will be revealed.
Correct Answer: Neither drive is the master

Learn why this is the correct answer

There is no need for a master or slave distinction with SATA drives because they each connect to the motherboard with their own SATA cable. Two IDE/PATA drives, on the other hand, could share the same data cable, but only one could use it at a time and thus each required a distinct name. In fact, by the time ATA-2 was approved in 1996, the spec referred to the drives as device 0 and device 1, despite master/slave being more commonly recognized.

When installing two PATA drives, jumpers on the back of the drives let you designate them a master or slave, the former of which had no priority over the latter and motherboards could also typically boot off either drive based on user preference. "Cable Select" was also a jumper option that could be chosen on the back of both drives to let them automatically set themselves as master or slave based on their position on the data cable.

Serial ATA (SATA) was introduced in 2003 and brought many improvements including smaller, less expensive cables, native hot-swapping, and faster data rates. Within five years of replacing PATA, SATA represented 99% of the desktop PC market share.

While SATA was the standard for many years, eventually it created a bottleneck for faster storage. PCI Express provides a faster interface speed than SATA and it's slowly replacing it as the new standard for high performance SSDs. PCIe using NVMe based storage provides 2-3x the performance of a regular SSD on the SATA interface.