- Thank you for choosing TechSpot as your download destination. If the download does not begin automatically, click here
- This driver has been downloaded 1,262 times so far
- All downloaded files are on their original form. No installers, download managers or other crappy additions are allowed.
Now downloading...
NetGear WNR834M RangeMax Next Wireless Router Firmware 1.4.23 NA
Wi-Fi Certified™ 802. OS: Windows XP/Vista. Category: Networking.
Wi-Fi Certified™ 802.11n draft 2.0
* WN511T and WN311T users must update their driver to be interoperable at 802.11n mode with this version of firmware.
You MUST Reset the router to default settings after upgrading the firmware
This version is for North America Only!
Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with "wired" or Ethernet connection only.
New Features:
1. 802.11n draft 2.0 Certified
To Upgrade:
Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with "wired" or Ethernet connection only.
1. Write down all the settings which you changed from the default values, since you may need to reenter them manually.
2. Download using the button to the right.
3. Log in to the router using a Web broswer. The URL is https://192.168.1.1 ( if you did not change the router's IP address ).
4. Click Maintenance > Router Upgrade
5. Click Browse and find the file you just downloaded.
6. Click Upload. Do not interrupt the upgrade while the router does this step. The router reboots when the upgrade is done.
7. After the router boots up, log in the router again.
You MUST Reset the router to default settings after upgrading the firmware
8. Click Maintenance > Backup Settings
9. Click Erase. The router reboots when the Erase operation is done.
10. If you would like to check that the upgrade was successful, log in to the router again at https://192.168.1.1, and check the firmware version.
11. Re-configure the router with the settings you saved in step 1. Optionally, You can use the Smart Wizard configuration assistant on the CD to reconfigure the router. Learn more.
* WN511T and WN311T users must update their driver to be interoperable at 802.11n mode with this version of firmware.
You MUST Reset the router to default settings after upgrading the firmware
This version is for North America Only!
Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with "wired" or Ethernet connection only.
New Features:
1. 802.11n draft 2.0 Certified
To Upgrade:
Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with "wired" or Ethernet connection only.
1. Write down all the settings which you changed from the default values, since you may need to reenter them manually.
2. Download using the button to the right.
3. Log in to the router using a Web broswer. The URL is https://192.168.1.1 ( if you did not change the router's IP address ).
4. Click Maintenance > Router Upgrade
5. Click Browse and find the file you just downloaded.
6. Click Upload. Do not interrupt the upgrade while the router does this step. The router reboots when the upgrade is done.
7. After the router boots up, log in the router again.
You MUST Reset the router to default settings after upgrading the firmware
8. Click Maintenance > Backup Settings
9. Click Erase. The router reboots when the Erase operation is done.
10. If you would like to check that the upgrade was successful, log in to the router again at https://192.168.1.1, and check the firmware version.
11. Re-configure the router with the settings you saved in step 1. Optionally, You can use the Smart Wizard configuration assistant on the CD to reconfigure the router. Learn more.