• Intermittent detection of DDC monitors no longer fails when connected to a RADEON™ 9100 IGP
• Connecting a CRT and FPD to an ATI RADEON™ 9600 series under Windows XP no longer results in the driver failing to keep the CRT and FPD enabled once the system is rebooted
• Setting the desktop resolution to 1280x1024 and connecting a TV as a secondary device with panning mode enabled no longer results in the system failing to respond when moving the mouse pointer around the desktop
• An error message indicating that the DVD can only be played back at 480p or 480i on component output is no longer displayed when stopping the ATI DVD player for 3 to 5 seconds
• Starting the TV in desktop mode, followed by enabling the Hide Controls and the Hide Controls and Frame no longer results in the TV not being restored properly when exiting 10ft mode
• Setting the colour depth to 16bpp under Windows 2000 and having the system enter the 3D screen saver no longer results in a memory leak
• Setting the AGP speed to off no longer results in the AGP speed still being shown as enabled to 4x in the SMARTGART tab
• Connecting a TV as the primary device followed by enabling clone mode and setting the desktop resolution to 1280x1024 no longer results in the Overlay Theater Mode not updating when moving the mouse to pan the display
• Clicking the default button found in the ATI 3D tab now updates the maximum resolution for SMOOTHVISION after applying a custom profile setting
• Setting the secondary CRT display to 1024x768 32bpp with extended desktop enabled no longer results in not being able to swap between the primary and secondary displays
• Connecting an HDTV and setting the display to 640x480 32bpp 30Hz followed by attempting to change the display to 800x600 32bpp 30Hz no longer results in an error message being displayed
• The Optimal Performance Direct 3D setting is now correct for an ATI RADEON™ 7000 series with 32Mb of memory
• The display driver version is now displayed in the the option page found in the display properties
• Display corruption is no longer seen when setting the 3D screen saver to initialize after one minute of idle time
• Toggling between expansion and non-expansion mode no longer produces overlay and display corruption
• Hot plugging a DVI monitor no longer results in the display resolution changing to 800x600 for both the DVI and the LCD
• Setting the CRT to 1024x768 or both the CRT and LCD to 1920x1200 no longer results in the display resolution reverting back to 800x600
• Connecting a TV and enable clone mode, followed by setting the desktop to 1280x1024 and enabling Overlay Theater Mode no longer results in the system rebooting when doing multiple device switching between the CRT and the TV
• Enabling extended desktop no longer results in the display not being visible when hot-unplugging the DVI while a 3D screen saver is active
• Setting the desktop resolution to 1024x768 32bpp followed by connecting a CRT no longer results in the LCD panel automatically being assigned as changed to the secondary display adapter
• The Compatibility Settings tab now reflects the correct settings whenever a 3D profile is applied
• The video image is no longer overscanned when enabling component out
• Display corruption is no longer seen when choosing fullscreen video and 16:9 (widescreen) under Theater mode settings
• The Philips capture driver now installs successfully under Windows 2000

Resolved Game Issues