TechSpot

dvd burning problems

By burke1
Mar 25, 2006
  1. recently my dvd burner has had problems and gives an error message after strating to burn..any ideas?


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 6:06:00 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:35:32 AM
    Nero API version: 6.6.0.14
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Internal Version: 6, 6, 0, 14d

    Recorder: <SONY DVD RW DRU-810A> Version: 2.0b - HA 2 TA 0 - 6.6.0.14
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : IC25N040ATCS05-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : MAT****A UJDA745 DVD/CDRW atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    MAT****A UJDA745 DVD/CDRW E: CDRom0
    SONY DVD RW DRU-810A F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (523184kB)
    Free physical memory: 180MB (184564kB)
    Memory in use : 64 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    25.3.2006
    NeroAPI
    6:54:33 PM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    6:54:33 PM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    6:54:33 PM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    6:54:33 PM #4 Text 0 File Reader.cpp, Line 127
    Reader running

    6:54:33 PM #5 Text 0 File Writer.cpp, Line 122
    Writer SONY DVD RW DRU-810A running

    6:54:33 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    6:54:33 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3297
    First writeable address = 0 (0x00000000)

    6:54:33 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3297
    First writeable address = 0 (0x00000000)

    6:54:33 PM #9 Text 0 File Burncd.cpp, Line 3230
    Turn on Disc-At-Once, using DVD media

    6:55:06 PM #10 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2258895 (501:58.45, 4411MB)

    6:55:06 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO

    6:55:06 PM #12 Text 0 File DlgWaitCD.cpp, Line 2433
    Recorder: SONY DVD RW DRU-810A, Media type: DVD+R

    6:55:06 PM #13 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Disc not writeable. Insert writeable disc.
    (Medium in drive: DVD+R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)

    6:55:06 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2258896 (2258896) = #2258896/501:58.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258896 blocks [SONY DVD RW DRU-810A]
    --------------------------------------------------------------

    6:55:06 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [SONY DVD RW DRU-810A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4626219008, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2258896 | lead-out | 1 | 0x41 | 0x00

    6:55:06 PM #16 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    6:55:06 PM #17 Text 0 File Burncd.cpp, Line 4114
    Cache writing successful.

    6:55:06 PM #18 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    6:55:06 PM #19 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 16x (22,160 KB/s)

    6:55:06 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    6:55:06 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x05EB0600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
    0x00 0x00 0x00 0x00 0x24 0x00

    6:55:07 PM #22 Text 0 File DVDR.cpp, Line 5762
    Drive: SONY DVD RW DRU-810A
    Book Type request [gen]: DVD-ROM, write to EEPROM
    Changing the Book Type was finished successfully, return code 0

    6:55:07 PM #23 CDR -1211 File DVDR.cpp, Line 4929
    Book Type set to: DVD-ROM

    6:55:07 PM #24 Text 0 File DVDPlusRW.cpp, Line 655
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:56:11 PM #25 TRANSFER -25 File Reader.cpp, Line 382
    Error reading data

    6:56:11 PM #26 Text 0 File Reader.cpp, Line 385
    Exception value: -1

    6:56:11 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    6:56:13 PM #28 Phase 127 File APIProgress.cpp, Line 276
    Generating DVD high compatibility borders

    6:56:38 PM #29 Phase 129 File APIProgress.cpp, Line 276
    Generating DVD borders completed successfully

    6:56:38 PM #30 Text 0 File DVDR.cpp, Line 5762
    Drive: SONY DVD RW DRU-810A
    Book Type request [gen]: DVD+R, write to EEPROM
    Changing the Book Type was finished successfully, return code 0

    6:56:38 PM #31 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 16x (22,160 KB/s)

    6:56:38 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    6:56:38 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 4:07:32 PM
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 6:06:00 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  2. howard_hopkinso

    howard_hopkinso TS Rookie Posts: 25,948   +19

    The wnaspi32.dll file is a 32-bit dll that provides device driver support for various CD/DVD burner drives. This dll is part of the Nero Burning ROM software.

    Have you tried uninstalling and reinstalling Nero?

    Maybe try some different burning software.

    Regards Howard :)
     
  3. Liquidlen

    Liquidlen TechSpot Paladin Posts: 1,646

    You said starting to give you problems!
    Has anything changed since it was working right?(new media , software, etc.) If yes post it.
    Your Sony is installed as the Slave on the IDE channel if I read that right.
    If so I would make it the Master . I find DVD writer's are much more fisnickity.
    Also you only have 150 mb of free virtual memory , that's a little light when it comes to burning DVD's , so you should make sure all unneccessary prgrams and processes are off, slow the write speed down .
    Turn off autorun , and also test a burn with DMA off on that IDE channel.
    Let us know if these work , if not there are other things to try.
     
  4. burke1

    burke1 TS Rookie Topic Starter

    dvd burner problems

    hey thanks for responding so quickly! I tried to reinstall nero but that didn't fix the problem...as for making the dvd burner the master, I'm not sure how to do that...but would that make the burner stop working all of the sudden? I haven't gotten any new software, all I've done is change the sockets I plug it into lol...It says there's a reading error or something, but this has never happend before! Is it possible it has just been used too many times and is dead?
     
  5. Liquidlen

    Liquidlen TechSpot Paladin Posts: 1,646

    What exactly did you mean by; " changing the sockets you plug it into."
    Is this an external unit?
     
  6. burke1

    burke1 TS Rookie Topic Starter

    burner problems

    Yes, I probably should have mentioned this, but it is an external dvd burner from Sony. All I have done is unplug the burner from the wall and put it into another socket...I don't think that should make a difference right?
     
  7. Liquidlen

    Liquidlen TechSpot Paladin Posts: 1,646

    That does make a difference.The power socket would not affect a burn unless you lost power.
    Forget about master and slave settings because this is probaly USB connection right?
     
  8. burke1

    burke1 TS Rookie Topic Starter

    burning problems

    yes it is a usb...is it possible the dvd burner is just burnt out?
     
  9. Liquidlen

    Liquidlen TechSpot Paladin Posts: 1,646

    I don't think so since your error got so far down the road .
    Starting with the things to try in my first thread.What have you done?
    Many things can affect a burn, you have to troubleShoot. Since you reloaded Nero you have to check infotool for a good ASPI layer (system and ,Nero's)
    Since this is a USB take it to a friend/Techshop that has burning software and see if it can burn there.
    Then post any errors/suceess etc.
     
  10. burke1

    burke1 TS Rookie Topic Starter

    Hey, I tried hooking the Sony dvd burner up to a friend's computer and it wouldn't even recognize that it was connected. I also tried updating the firmware, but that still did not fix the problem. any ideas??
     
  11. cuttjr

    cuttjr TS Rookie

    Im having the same problem with my Sony 710UL. Once I lost the drive, and reinstalled it. It went from an E drive to an F drive. Now, it has just quit working all together. When I troubleshoot, it says the device is there and working properly. If you unplug the drive from the computer, it recognizes that the drive has been disconnected. When the drive is empty it is listed as: F: DVD-RW drive. and if something is holding to be burned, it will ask you if you want to burn it. But when you put a DVD in to burn, it turns to a CD drive~~ F: CD drive. This whole problem started by it only burning part of a disk and I would get a message similar to the one the guy above got. Now it won't work at all. I have uninstalled and reinstalled several times, and deleted all Nero programs. Any ideas?
     
     
  12. Mictlantecuhtli

    Mictlantecuhtli TS Evangelist Posts: 4,919   +9

    Welcome to TechSpot cuttjr

    Have you tried uninstalling the drive using Device Manager?

    In Device Manager, select "Show hidden devices" from View menu, then remove all instances of the drive in DVD/CD-ROM drives.

    Reboot and the drive should be detected automatically again.
     
  13. cuttjr

    cuttjr TS Rookie

    Thanks for the response. When I did that, it was uninstalled and was not listed on the control panel. When I restarted the computer, it was there again. But it did not detect and ask to install, it was just there. It was listed as a DVD-RW drive, but again when I put a blank DVD in it tured to a CD drive. My feeling is that it is a confusion in the computer and not a hardware problem.
     
  14. Liquidlen

    Liquidlen TechSpot Paladin Posts: 1,646

    We have seen this with the various types of USB drives.
    I frimly believe a part of the problem is the existing drive letter configuration before a usb is attached.Windows pushes drive letters around in a strange manner.
    Anyway I have always had success by moving my Fixed Rom drives to the end of the Alphabet." R-W" you do this in Right click My computer>Manage>Disk manager.
    This eliminates conflict with swapable USB drives.
    Check the web site for your USB Drive for drivers/USB manager software.
     
  15. burke1

    burke1 TS Rookie Topic Starter

    dvd burner problems

    hey guys, i tried reinstalling the device driver and that still did not work... i keep getting the error message:
    #25 TRANSFER -25 File Reader.cpp, Line 382
    Error reading data

    this happens after it begins writing the lead in, so it ruins a new dvd every try....
     
  16. cuttjr

    cuttjr TS Rookie

    burner

    I have uninstalled the drive...changed the drive letter to an "R", uninstalled and reinstalled nero and nothing works. It burns the first 3% and quits. Any other ideas? Or just time for a new one?
    :angel:
     
  17. Mictlantecuhtli

    Mictlantecuhtli TS Evangelist Posts: 4,919   +9

    That usually happens when "Removable Storage" service isn't running.
     
  18. cuttjr

    cuttjr TS Rookie

    So how do I fix/troubleshoot this kind of error? Also, last night I reinstalled Nero, and it burned 3% of a disk, then said it was complete and stopped. It was doing that before too.
     
  19. Liquidlen

    Liquidlen TechSpot Paladin Posts: 1,646

    Cutr Quote
    "...When the drive is empty it is listed as: F: DVD-RW drive. and if something is holding to be burned, it will ask you if you want to burn it...."

    This sounds as though you have not disabled Xp's burning software it will conflict with Nero.
    Go to the property page for this Rom and uncheck the" Enable writing to this Drive" checkbox (Exact wording I don't remember,I use W2K, but you will see it.)

    Also check the troubleshooting above , in particular check Infotool in Nero For a good ASPI layer .
     
Topic Status:
Not open for further replies.


Add New Comment

TechSpot Members
Login or sign up for free,
it takes about 30 seconds.
You may also...


Get complete access to the TechSpot community. Join thousands of technology enthusiasts that contribute and share knowledge in our forum. Get a private inbox, upload your own photo gallery and more.